ATEN Technology CS-74A user manual System Requirements, Console, Computers, Cables

System Requirements

Console

MA VGA, SVGA, or Multisync monitor capable of the highest resolution that you will be using on any computer in the installation

MA PS/2 style keyboard

MA PS/2 style mouse

Computers

The following equipment must be installed on each computer that is to be connected to the system:

MA VGA, SVGA or Multisync port.

MA 6-pin mini-DIN (PS/2 Style) mouse port.

MEither a 6-pin mini-DIN (PS/2 Style) keyboard port with +5V DC on pin 4 and Ground on pin 3, or a 5-pin DIN (AT Style) keyboard port with +5V DC on pin 5 and ground on pin 4.

Cables

Only CS Custom cable sets specifically designed to work with this switch may be used. One Console Connector Cable and four KVM cable sets (2 x 1.2 m; 2 x 1.8 m) are provided with this package.

Note: 1. Cable sets are also available in 3 m lengths. If you need additional cables, or 3 m cables, contact your dealer.

2.If your computer uses a standard AT style keyboard socket, you will need a PS/2-to-AT keyboard adapter (Part No. 2A-106 or any standard keyboard adapter), in order to plug the cable into the Computer’s keyboard port.

3.The CS-74A only supports PS/2 style mice - it does not support serial mice.

-3 -

2003-02-18