ATEN Technology CS-1762, CS-1764 user manual Introduction, Overview

Page 11

Chapter 1.

Introduction

Overview

The Master View CS-1762 or CS-1764 DVI KVMP Switch charts a revolutionary new direction in KVM (Keyboard, Video, Mouse) switch functionality by combining a 2 port (CS-1762) or 4 port (CS-1764) KVM switch with a 2 port USB hub at the same time as it provides an interface for a digital monitor (DVI).

As a KVM switch, it allows users to access two or four computers from a single USB keyboard, USB mouse, and monitor console. As a USB hub, it permits each computer to access any peripherals connected to the hub on a ‘one computer at a time’ basis.

The CS-1762 / CS-1764’s independent (asynchronous) switching feature, allows the KVM focus to be on one computer while the USB peripheral focus is on another. This eliminate the need to purchase a separate USB hub as well as the need to purchase separate stand-alone peripheral sharers - such as print servers, modem splitters, etc.

The CS-1762 / CS-1764 further improves on previous designs with DVI (Digital Visual Interface) connectors, and the transfer of keyboard and mouse data to the computers via a fast, reliable USB connection. DVI supports both digital video input (flat panel displays, data projectors, plasma displays, digital TVs and set-top boxes) and analog video input (traditional monitors and TVs).

The CS-1762 / CS-1764 is audio enabled. A single microphone can provide audio input to each of the computers, and you can listen to the audio output of each computer on a single set of speakers (on a one-at-a-time basis). As with the USB peripherals, the audio focus can be independent of the KVM focus.

Setup is fast and easy; simply plug cables into their appropriate ports. There is no software to configure, no installation routines, and no incompatibility problems. Since the CS-1762 / CS-1764 intercepts keyboard input directly, it will work on multiple computing platforms (PC (x86/x64), Macintosh PowerPC, and Sun Microsystems Sparc). There are two convenient methods to access the computers: push button port selection switches located on the unit’s front panel; and hotkey combinations entered from the keyboard.

1

Image 11
Contents CS-1762 CS-1764 FCC Information User Notice Safety Instructions Page Package Contents Contents Firmware Upgrade Utility This manual uses the following conventions ConventionsThis Page Intentionally Left Blank Overview IntroductionPage Features Cables Hardware RequirementsConsole ComputersCS-1762 Front View Port Selection SwitchesCS-1764 Front View CS-1762 / CS-1764 Rear View USB Hub Section Cable Connection InstallationBefore you Begin Page Hot Plugging Manual SwitchingBasic Operation Port ID Numbering Powering Off and RestartingHotkey Operation Port SwitchingHotkey Action Cycling Through the PortsGoing Directly to a Port Auto Scanning Invoking HSM Hotkey Setting ModeAlternate HSM Invocation Keys Alternate Port Switching KeysFunction Key Operation Keyboard Operating PlatformHotkey Beeper Control List Hotkey SettingsUSB Reset Disable Port Switching KeysRestore Default Settings Firmware Upgrade ModeKey Function HSM Summary TablePC Keyboard Mac Keyboard Mac Keyboard EmulationPC Keyboard Sun Keyboard Sun Keyboard EmulationFirmware Upgrade Utility Starting the Upgrade Firmware Upgrade Utility Page Upgrade Succeeded Upgrade Failed Appendix SpecificationsSymptom Possible Cause Action TroubleshootingSetting Default Hotkey Default SettingsLimited Warranty This Page Intentionally Left BlankNotes