ATEN Technology CS-1764, CS-1762 user manual Safety Instructions

Page 4

CS-1762 / CS-1764 User Manual

Safety Instructions

ŠRead all of these instructions. Save them for future reference.

ŠFollow all warnings and instructions marked on the device.

ŠDo not place the device on any unstable surface (cart, stand, table, etc.). If the device falls, serious damage will result.

ŠDo not use the device near water.

ŠDo not place the device near, or over, radiators or heat registers.

ŠThe device cabinet is provided with slots and openings to allow for adequate ventilation. To ensure reliable operation, and to protect against overheating, these openings must never be blocked or covered.

ŠThe device should never be placed on a soft surface (bed, sofa, rug, etc.) as this will block its ventilation openings. Likewise, the device should not be placed in a built in enclosure unless adequate ventilation has been provided.

ŠNever spill liquid of any kind on the device.

ŠUnplug the device from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.

ŠThe device should be operated from the type of power source indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company.

ŠThe device is equipped with a 3-wire grounding type plug. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not attempt to defeat the purpose of the grounding-type plug. Always follow your local/national wiring codes.

ŠDo not allow anything to rest on the power cord or cables. Route the power cord and cables so that they cannot be stepped on or tripped over.

ŠIf an extension cord is used with this device make sure that the total of the ampere ratings of all products used on this cord does not exceed the extension cord ampere rating. Make sure that the total of all products plugged into the wall outlet does not exceed 15 amperes.

iv

Image 4
Contents CS-1762 CS-1764 FCC Information User Notice Safety Instructions Page Package Contents Contents Firmware Upgrade Utility Conventions This manual uses the following conventionsThis Page Intentionally Left Blank Introduction OverviewPage Features Hardware Requirements ConsoleComputers CablesPort Selection Switches CS-1762 Front ViewCS-1764 Front View CS-1762 / CS-1764 Rear View USB Hub Section Before you Begin InstallationCable Connection Page Basic Operation Manual SwitchingHot Plugging Powering Off and Restarting Port ID NumberingPort Switching Hotkey OperationCycling Through the Ports Hotkey ActionGoing Directly to a Port Auto Scanning Hotkey Setting Mode Invoking HSMAlternate Port Switching Keys Alternate HSM Invocation KeysKeyboard Operating Platform Function Key OperationList Hotkey Settings USB ResetDisable Port Switching Keys Hotkey Beeper ControlFirmware Upgrade Mode Restore Default SettingsHSM Summary Table Key FunctionMac Keyboard Emulation PC Keyboard Mac KeyboardSun Keyboard Emulation PC Keyboard Sun KeyboardFirmware Upgrade Utility Starting the Upgrade Firmware Upgrade Utility Page Upgrade Succeeded Upgrade Failed Specifications AppendixTroubleshooting Symptom Possible Cause ActionLimited Warranty Hotkey Default SettingsSetting Default This Page Intentionally Left BlankNotes