Appendix
Troubleshooting
Symptom | Possible Cause | Action | |
Erratic | Unit not receiving | Use a DC 5V power adapter if you are not | |
behavior. | enough power. | already using one. If you are already using a | |
|
| power adapter, check that it matches the | |
|
| system specifications (DC 5V), and that it is | |
|
| plugged in and functioning properly. | |
|
|
| |
Keyboard | Keyboard and/or | Press and hold port selection switches 1 and 2 | |
and/or Mouse | mouse need to be | for two seconds. | |
not responding. | reset. |
| |
Unplug the cable(s) from the console port(s), | |||
|
| ||
|
| then plug it/them back in. | |
|
|
| |
| No connection to | Check the cable from the switch to the computer | |
| the computer. | to make sure it is properly connected. | |
|
|
| |
| KVM switch needs to | Power off all devices on the installation (see the | |
| be reset. | note at the top of p. 8); power off the KVM | |
|
| switch; wait five seconds; then power up. | |
|
|
| |
USB devices | USB ports need to | Unplug the device’s USB cable from the USB port | |
not responding | be reset. | on the switch’s rear panel, then plug it back in. | |
|
|
| |
|
| Use the USB Reset hotkey combination (see p. | |
|
| 16), to reset the USB ports. | |
|
|
|
Keyboard Language Codes
Language
US English
French
Japanese
Code
33
08
15
26 |