ATEN Technology CS-1732 user manual Overview

Page 5

Overview

The Master View CS-1732 and CS-1734 represent a revolutionary new direction in KVM (Keyboard, Video, Mouse) Switches. The CS-1732 and CS-1734 are dual function two and four Port KVM Switches combined with 2 Port USB Hubs. As KVM switches, they allow users to access two and four computers from a single USB keyboard, USB mouse, and monitor console. The CS-1732 / CS-1734 improves on previous designs by giving the a choice of transferring keyboard and mouse data to the computers via a USB connection, or with the traditional PS/2 connection.

If a USB connection is used, the CS-1732 / CS-1734’s integrated two-port USB hub is available to each of the computers. This permits each computer to access any peripherals connected to the hub on a ‘one computer at a time’ basis. The CS-1732 / CS-1734’s independent (asynchronous) switching feature, allows the KVM focus to be on one computer while the USB peripheral focus is on another. For example, a user could be working on a spreadsheet on one computer while printing from a second computer at the same time. Not only does this eliminate the need to purchase a separate USB hub, it also eliminates the need to purchase separate stand-alone peripheral sharers - such as print servers, modem splitters, etc.

Recognizing the increased importance of sound, the CS-1732 / CS-1734 provides Multimedia keyboard support, and is audio enabled. A single microphone can provide audio input to each of the computers, and you can listen to the audio output of each computer on a single set of speakers (on a one-at-a-time basis).

There are two convenient methods to access the computers: push button port selection switches located on the unit’s front panel; and Hotkey combinations entered from the keyboard.

Setup is fast and easy; simply plug cables into their appropriate ports. There is no software to configure, no installation routines, and no incompatibility problems. Since the CS-1732 / CS-1734 intercepts keyboard input directly, it works on multiple operating platforms (PC compatible, Mac*, Sun*, etc.).

There is no better way to save time and money than with a Master View CS-1732 / CS-1734 installation. Since a single console manages all of the computers, the CS-1732 / CS-1734 setup: eliminates the expense of having to purchase separate console components for each computer; saves all the space those extra components would take up; saves on energy costs; and eliminates the inconvenience and wasted effort involved in constantly moving from one computer to another.

*Mac and Sun computers must use the USB cable connection (see p. 3).

CS-1732 / CS-1734 User Manual

1

2003-07-17

Image 5
Contents CS-1732 CS-1734 2003-07-17 Packing List Contents Overview Features Hardware Requirements Connector Cable Length Part NumberConsole ComputerCS-1732 Front View IntroductionCS-1734 Front View CS-1732 / CS-1734 Rear View USB Peripheral Section Cable Connection InstallationBefore you Begin 2003-07-17 USB Cable Connection PS/2 Cable Connection Operation Powering Off and RestartingHot Plugging Port ID NumberingHotkey Operation Invoking Hotkey ModeSelecting the Active Port Hotkey Port AccessAuto Scan Mode Hotkey Beeper Control Alternate Hotkey Invocation KeysFunction Key Operation Hotkey ConfigurationPS/2 Keyboard Sun Keyboard Keyboard EmulationSun Keyboard PS/2 Mac Keyboard Mac KeyboardTo prepare for the firmware upgrade, do the following Firmware Upgrade UtilityStarting the Upgrade 2003-07-17 Page Upgrade Succeeded Upgrade Failed Firmware Upgrade Recovery Keyboard Language Codes TroubleshootingAppendix Function CS-1732 CS-1734 SpecificationsLimited Warranty