
Instant EtherFast® Series
OSPF Configuration Menu
The OSPF Configuration Menu screen allows you to configure the OSPF parameters.
•Router ID Selection - Allows you to assign an algorithm.
•Router ID - The OSPF identifier for the router at the other end of the link.
•AS Border Status - Enable or disable the router that exchanges rout- ing information with routers that belong to other Autonomous Systems.
•RFC 1583 Compatibility - Controls the preference rules when choosing among multiple
•Area ID Configuration - Defines an area within which all OSPF routers actively exchange routing information to ensure that they all have an identical link state database.
•OSPF Area Range Configuration - Defines a range of subnetwork addresses. An area range is used to summarize route information exchanges between Area Border Routers.
EtherFast® Layer 3 Management
•OSPF Virtual Link Configuration - Defines a virtual link that can be used to connect an OSPF area not physically adjacent to the OSPF backbone, or to create a backup link to any area.
•OSPF Host Router Configuration - Defines a main route of OSPF to connect to other areas.
Select Apply to make changes. Select OK to return to the previous panel. Select Cancel to cancel any changes.
60 | 61 |