Advantech TPC-1260 manual Specifications, 2 I/O ports

Page 13

1.2 Specifications

1.2.1System kernel (CPC-2365)

-CPU: Transmeta CrusoeTM TM5400 (clock rate 500 MHz)

-BIOS: Award 256 KB flash memory

-South bridge: VIA 82C686A

-VGA: Silicon Motion SMI710/712 VGA/LCD controller; PCI 2.1 compliant; 4 MB embedded DRAM

-DRAM: built-in 128 MB SDRAM; among which 16 MB is occupied by CPU (Code MorphingTM Software) and the other 112 MB is avail- able for users

-Ethernet: NS DP83815 10/100Base-T Ethernet controller; IEEE 802.3u protocol compatible

-Watchdog timer: MAX706 watchdog timer; 1.6 second timeout period

-IDE: 1 EIDE channel supports one 2.5” IDE HDD and one Compact- Flash card simultaneously

-Floppy diskette: the TPC-1260 does not provide floppy disk interface

1.2.2 I/O ports

-1 parallel port: supports EPP/ECP modes

-4 serial ports: RS-232 (COM1~COM3) and RS-422/485 (COM4)

-1 RJ-45 Ethernet port

-2 PS/2 ports: 6-pin mini-DIN ports for keyboard and mouse

-1 USB: USB 1.0 compliant

-1 PC/104 plus expansion slot: 32-bit PCI expansion slot in PC/104 plus form factor

Chapter 1 General Information

3

Image 13

Contents TPC-1260 Copyright notice Acknowledgments Packing List FCC Class a Safety Instructions Wichtige Sicherheishinweise Contents Figures Tables Page General Information Introduction 2 I/O ports SpecificationsStorage Safety and environmentLCD Mtbf LCD specificationsPower Touchscreen specificationsI/O ports arrangement Panel mounting MountingWall mounting/desktop stand 1Exploded diagram Exploded diagram1 Dimensions and cutout Dimensions and cutoutSystem Quick Starting Unpack the package Install HDD Install CompactFlash memory card Plug the power lines to the system power receptor Turn on the system power switch Engine of the TPC-1260 Label Function CPC-2365 main boardConnector pin assingments 1 TPC-1260 I/O board I/O port side TPC-1260 I/O board2 TPC-1260 I/O board LCD side 1 TPC-1260 I/O board connector/jumper list Windows CE in the TPC-1260 1 Windows CE on TPC-1260 Soft-keyboard TPC-1260 utilitiesScreen saver 2 Screen saver setting Watchdog timerNetworking via Ethernet Networking2 Neworking by Windows Explorer 3 Remote networking Networking via serial port4 Make new connection 6 Default settings Web browser Application program developmentSystem requirements Building Windows CE runtime 1 Flow-chart of building Windows CE runtimePage System Tuning LCD brightness tuning LCD contrast tuning1 DOS/Windows Family Touchscreen calibrationWindows CE Double-click Windows Explorer 4 Calibration When calibration is done the utility will save the settings System Tune Up Page Maintenance 1 CPU board cover CPU board replacement3 Remove the CPU board 1 Replace the fuse Fuse replacementSerial Port Settings Baud Rate Settings SW1 Serial Port SettingsData Format/RS-422 Control Settings Page Watchdog Timer Programming Example Clear the watchdog timer Watchdog timer programming exampleWindows Touch Screen Installation Figure C-1 Hardware Touchscreen driver in WindowsClick the Device Manager… button Figure C-3 Uninstall the driver Figure C-4 Mouse properties Go to the Driver page, and click the Update Driver button Figure C-6 Select driver from known list Manufacturers list, find out and select Touch- Screen Figure C-8 Re-install the driver Figure C-9 Finish installation of touchscreen driver Fuse Specifications Fuse used on the TPC-1260 is Fuse Specifications