Advantech TPC-1260 manual Storage, Safety and environment

Page 14

1.1.3 Storage

The TPC-1260 provides one EIDE channel for one 2.5” 44-pin HDD and one CompactFlash card. The system boot-up sequence is:

-HDD and CompactFlash exist simultaneously: the system will boot from the HDD. The HDD must be set as master. If the HDD does not contain operating system, the TPC-1260 will automatically boot from the CompactFlash.

-HDD exists only: the system will boot from the HDD

-CompactFlash card exists only: the system will boot from the CompactFlash

1.1.4Safety and environment

Safety

-FCC class A and CE certificated

-BSMI certificated

-The front bezel is compliant with NEMA 4

Environment

-Operating temperature: 0~50 degrees Celsius

-Storage temperature: -20~60 degrees Celsius

-Humidity: 10~95% @ 40°C relative humidity (non-condensing)

-Vibration: 10~18 Hz: 1.5mm peak-to-peak displacement; 18~500 Hz: 1G acceleration

4 TPC-1260 User's Manual

Image 14

Contents TPC-1260 Copyright notice Acknowledgments Packing List FCC Class a Safety Instructions Wichtige Sicherheishinweise Contents Figures Tables Page General Information Introduction Specifications 2 I/O portsSafety and environment StorageLCD specifications LCD MtbfI/O ports arrangement Touchscreen specificationsPower Mounting Panel mountingWall mounting/desktop stand Exploded diagram 1Exploded diagramDimensions and cutout 1 Dimensions and cutoutSystem Quick Starting Unpack the package Install HDD Install CompactFlash memory card Plug the power lines to the system power receptor Turn on the system power switch Engine of the TPC-1260 CPC-2365 main board Label FunctionConnector pin assingments TPC-1260 I/O board 1 TPC-1260 I/O board I/O port side2 TPC-1260 I/O board LCD side 1 TPC-1260 I/O board connector/jumper list Windows CE in the TPC-1260 1 Windows CE on TPC-1260 Screen saver TPC-1260 utilitiesSoft-keyboard Watchdog timer 2 Screen saver settingNetworking Networking via Ethernet2 Neworking by Windows Explorer Networking via serial port 3 Remote networking4 Make new connection 6 Default settings System requirements Application program developmentWeb browser 1 Flow-chart of building Windows CE runtime Building Windows CE runtimePage System Tuning LCD contrast tuning LCD brightness tuningWindows CE Touchscreen calibration1 DOS/Windows Family Double-click Windows Explorer 4 Calibration When calibration is done the utility will save the settings System Tune Up Page Maintenance CPU board replacement 1 CPU board cover3 Remove the CPU board Fuse replacement 1 Replace the fuseSerial Port Settings Serial Port Settings Baud Rate Settings SW1Data Format/RS-422 Control Settings Page Watchdog Timer Programming Example Watchdog timer programming example Clear the watchdog timerWindows Touch Screen Installation Touchscreen driver in Windows Figure C-1 HardwareClick the Device Manager… button Figure C-3 Uninstall the driver Figure C-4 Mouse properties Go to the Driver page, and click the Update Driver button Figure C-6 Select driver from known list Manufacturers list, find out and select Touch- Screen Figure C-8 Re-install the driver Figure C-9 Finish installation of touchscreen driver Fuse Specifications Fuse Specifications Fuse used on the TPC-1260 is