Blaupunkt RMD 169 manual KeyCard anti-theft protection system, Removing the KeyCard

Page 13

KeyCard anti-theft protection system

One KeyCard is supplied with the unit.

The car radio can however also be operat- ed with a second KeyCard.

Should you lose or damage a KeyCard, you can obtain a replacement from a specialist dealer.

If you are using two KeyCards, the settings are taken from the first KeyCard. You can customize the following functions:

Station key assignment, bass, treble, bal- ance and fader settings, loudness, TA (traf- fic announcement volume), beep volume, LOW-EQ, HIGH-EQ.

The last state selected such as frequency band, station setting, TA priority, AF, REG ON/OFF, SCAN-TIME, seek run sensitivity,

•Insert the KeyCard with the contact surface downwards, as shown in the diagram (Arrow 1).

2

1

3

•Slide the card in the direction of the ar- row (2) and engage the control panel (Arrow 3).

The car radio is ready for use.

Removing the KeyCard

Disengage the control panel as follows

•Press the knob 1: the control panel folds down forwards.

•Slide the card as far as possible to the right, and remove from the front.

•Engage the control panel.

For safety reasons, the control panel must always be engaged whilst the vehicle is moving.

When leaving the vehicle, open the control panel and remove the Key- Card in order to prevent theft.

ON VOL (volume at switch on), SHARX, is also saved.

Your selected settings are therefore select- ed automatically when you insert your Key- Card.

Switching on the unit

•Switch on the unit with ON.

To insert the KeyCard, disengage the con- trol panel:

•Press the knob 1: the control panel folds down forwards

Should a KeyCard other than that belong- ing to the unit be inserted, CARD ERR” ap- pears on the display.

The unit switches itself off after approx. 10 seconds.

Should a card other than a KeyCard be in- serted (e.g. a phonecard or credit card), “WRONG KC” is displayed for approx. 2 seconds.

In this case, remove the card and insert a KeyCard for the unit.

•Press ON to switch on the unit.

“Teaching in” a second Key- Card/replacing the KeyCard

An additional KeyCard can be “taught in” whilst the unit is in operation with the first KeyCard.

To “teach in” a second KeyCard:

•Slide the first KeyCard in and switch the unit on.

•Press DSC and use / to select “LEARN KC”.

•Press << or >>.

”CHANGE” appears on the display.

48

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Dallas RMD 169 Texas DJ 13 12 Contents Condensed instructions Next FM Condensed instructionsNext AM MW, LW BNDMIX ExitRPT Repeat Rocker Radio modeCLR DPEAUD AUD DSC-MODE PTYDisplay DIS= TU Tuner CDCRemote control RC 08 optional Traffic safety Read the following before using Telephone mute UnitAccessories GuaranteeKeyCard anti-theft protection system Switching on the unitRemoving the KeyCard Teaching in a second Key- Card/replacing the KeyCardKeyCard anti-theft protection system Page AF alternative frequency Radio operation with RDS Radio Data SystemREG Regional Radio operation with RDS Radio Data System Station tuningSelecting the frequency band Paging through the transmis- sion chains FM onlyStoring stations Changing the memory level FMCalling up stored stations Seek run Changing the sensitivityNews Activating/deactivating PTYStoring the programme type Prompting the station for the pro- gramme typePTY key Displaying the selected programme type Selecting the programme typePTY priority Activating/deactivating priority for traffic programmes Traffic programme reception with RDS-EONAutomatic seek run Deactivating the warning toneInserting a MiniDisc Activating MiniDisc modeRemoving the MiniDisc MD textActivating CD changer mode MiniDisc mode/CD changer modeSelecting tracks and CDs CDs only in CD changer mode Repeating tracks and CDs CDs only in CD changer modeActivating/deactivating TPM replay Storing tracks with TPMClearing the TPM memory Starting Scan Assigning a name to CDs in CD changer mode onlyEnding Scan MIX OFFDeleting the CD name/TPM store Using DSC-UPDATEDeactivating hours adjustment Setting the timeClock time Displaying the timeAdjustment instructions Equalizer settingAdjusting the frequency level Selecting a quality factor for the bass Equalizer settingOr mid-range Frequency ranges Tonal effect/problem Measure Bass range Tips on adjusting the equalizerLower mid-range Mid-rangePeak ON/OFF Programming with DSCScroll REGProgramming with DSC 12/24H ModeFM/AM Sens STEREO/MONOEnd DSC programming/store settings Overview of the factory default settings with DSCAmplifier Technical data Glossary Technical TerminologyTuner MuteScan Glossary Technical TerminologySoftkey Software key Bosch Gruppe

RMD 169 specifications

The Blaupunkt RMD 169 is a sophisticated multimedia receiver that seamlessly blends modern technology with user-friendly features, making it a popular choice for car audio enthusiasts. This unit is designed to enhance the driving experience by providing superior sound quality along with a variety of connectivity options.

One of the standout features of the RMD 169 is its compatibility with multiple media formats. It supports USB flash drives, SD cards, and auxiliary inputs, allowing users to easily connect their smartphones or other devices. This versatility ensures that drivers can enjoy their favorite tracks, whether they are stored on a digital device or streamed directly.

The receiver boasts a crisp, high-resolution LCD display, which provides clear visibility of track information, settings, and system status. The interface is user-friendly, allowing drivers to navigate through songs, playlists, and settings with minimal distraction. Furthermore, the RMD 169 comes equipped with Bluetooth technology, facilitating hands-free calling and audio streaming directly from smartphones.

Sound quality is a prominent highlight of the Blaupunkt RMD 169. The receiver features a robust equalizer with customizable sound settings, enabling users to tailor the audio output to their personal preferences. With a built-in amplifier, the RMD 169 delivers powerful sound while minimizing distortion, ensuring an enjoyable listening experience even at high volumes.

In terms of compatibility, the RMD 169 works seamlessly with a wide range of vehicles and audio systems. Its standard-sized design means it can replace most existing car stereo units without requiring additional modification. The installation process is straightforward, further simplifying the upgrade for users who want to modernize their car’s audio setup.

Safety and convenience are also prioritized with the RMD 169. The receiver includes features like a detachable front panel for added security and adjustable brightness settings for the display, making it easier to read in various lighting conditions. Additionally, the unit supports multiple languages, catering to a diverse user base.

Overall, the Blaupunkt RMD 169 combines cutting-edge technology, exceptional sound quality, and user-focused design in a compact and stylish package. Whether you’re an audiophile or a casual listener, this multimedia receiver stands out as an excellent option for enhancing any car audio experience.
Top Page Image Contents