Blaupunkt RMD 169 manual KeyCard anti-theft protection system

Page 14

KeyCard anti-theft protection system

• Remove the first KeyCard and, with

Battery positive and constant battery posi-

Keep the car radio passport in a safe

“CHANGE” on the display, insert the

tive are connected as described in the in-

place, but not in the car.

new KeyCard.

stallation instructions.

Teaching in the new KeyCard

When “READY” or “LEARN KC” appears: The unit is switched off; the control panel is

• Press DSC.

open; the KeyCard is removed; LED ON is

• Insert the new KeyCard and engage

selected in the DSC menu (default factory

The unit is now also ready for operation with

the control panel.

setting).

the new KeyCard.

 

If necessary, refer to “Programming with • Press ON.

A maximum of two KeyCards can be taught

DSC – LED”.

• Press TU and ST1 within 5 seconds:

in.

Deactivating the flashing LED

“0000” appears on the display.

If a third KeyCard is taught in, the card which

Select “LED OFF” in the DSC menu to de-

• Using the rocker, enter the four-digit

is not employed for the teaching-in process

activate the flashing LED.

master code from the car radio pass-

of the new card automatically loses its va-

 

port:

lidity.

Care of the KeyCard

/ - Enter the digits (press once for

 

Displaying the radio passport

The KeyCard will function perfectly only if

one, twice for two, etc.)

<< >> - Select the insertion point

data

the contacts are kept free of foreign parti-

• After entering the correct master code,

 

cles. Avoid touching the contacts directly

You can use the KeyCard supplied to call

press ENT.

with your hands.

up the radio passport data such as the unit

The new KeyCard is accepted when the unit

If necessary, clean the KeyCard contacts

name, type number (7 6 ...) and serial

switches to play.

using a cotton bud soaked in alcohol.

number on the display.

 

 

 

Refer to “Programming with DSC – READ

KeyCard lost/damaged

Input errors

KC” for the procedure.

Should the input not be correct, “CODE

Visual display for anti-theft pro-

Should you damage or lose the KeyCard for

ERR” appears on the display. After three

successive incorrect inputs, “WAIT 1h” ap-

your unit, you can teach in a new KeyCard.

tection

pears on the display. The unit remains in

You can purchase the new KeyCard from

 

Wait mode for one hour.

Anti-theft protection is provided in the form

your dealer. You will also require the mas-

• Switch the unit off and on again.

of a flashing LED ? when the vehicle is

ter code for the unit, which can be found in

parked and the KeyCard removed.

the car radio passport.

Repeat the teach-in process.

The following conditions must be met:

DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS

49

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Dallas RMD 169 Texas DJ 13 12 Contents Condensed instructions Next AM MW, LW Condensed instructionsNext FM BNDExit MIXCLR Rocker Radio modeRPT Repeat DPEAUD DSC-MODE PTY AUDDIS DisplayCDC = TU TunerRemote control RC 08 optional Accessories Read the following before using Telephone mute UnitTraffic safety GuaranteeRemoving the KeyCard Switching on the unitKeyCard anti-theft protection system Teaching in a second Key- Card/replacing the KeyCardKeyCard anti-theft protection system Page REG Regional Radio operation with RDS Radio Data SystemAF alternative frequency Selecting the frequency band Station tuningRadio operation with RDS Radio Data System Paging through the transmis- sion chains FM onlyCalling up stored stations Changing the memory level FMStoring stations Changing the sensitivity Seek runActivating/deactivating PTY NewsPTY key Displaying the selected programme type Prompting the station for the pro- gramme typeStoring the programme type Selecting the programme typePTY priority Automatic seek run Traffic programme reception with RDS-EONActivating/deactivating priority for traffic programmes Deactivating the warning toneRemoving the MiniDisc Activating MiniDisc modeInserting a MiniDisc MD textSelecting tracks and CDs CDs only in CD changer mode MiniDisc mode/CD changer modeActivating CD changer mode Repeating tracks and CDs CDs only in CD changer modeClearing the TPM memory Storing tracks with TPMActivating/deactivating TPM replay Ending Scan Assigning a name to CDs in CD changer mode onlyStarting Scan MIX OFFUsing DSC-UPDATE Deleting the CD name/TPM storeClock time Setting the timeDeactivating hours adjustment Displaying the timeAdjusting the frequency level Equalizer settingAdjustment instructions Or mid-range Equalizer settingSelecting a quality factor for the bass Lower mid-range Tips on adjusting the equalizerFrequency ranges Tonal effect/problem Measure Bass range Mid-rangeScroll Programming with DSCPeak ON/OFF REGFM/AM Sens 12/24H ModeProgramming with DSC STEREO/MONOOverview of the factory default settings with DSC End DSC programming/store settingsTuner Technical data Glossary Technical TerminologyAmplifier MuteSoftkey Software key Glossary Technical TerminologyScan Bosch Gruppe

RMD 169 specifications

The Blaupunkt RMD 169 is a sophisticated multimedia receiver that seamlessly blends modern technology with user-friendly features, making it a popular choice for car audio enthusiasts. This unit is designed to enhance the driving experience by providing superior sound quality along with a variety of connectivity options.

One of the standout features of the RMD 169 is its compatibility with multiple media formats. It supports USB flash drives, SD cards, and auxiliary inputs, allowing users to easily connect their smartphones or other devices. This versatility ensures that drivers can enjoy their favorite tracks, whether they are stored on a digital device or streamed directly.

The receiver boasts a crisp, high-resolution LCD display, which provides clear visibility of track information, settings, and system status. The interface is user-friendly, allowing drivers to navigate through songs, playlists, and settings with minimal distraction. Furthermore, the RMD 169 comes equipped with Bluetooth technology, facilitating hands-free calling and audio streaming directly from smartphones.

Sound quality is a prominent highlight of the Blaupunkt RMD 169. The receiver features a robust equalizer with customizable sound settings, enabling users to tailor the audio output to their personal preferences. With a built-in amplifier, the RMD 169 delivers powerful sound while minimizing distortion, ensuring an enjoyable listening experience even at high volumes.

In terms of compatibility, the RMD 169 works seamlessly with a wide range of vehicles and audio systems. Its standard-sized design means it can replace most existing car stereo units without requiring additional modification. The installation process is straightforward, further simplifying the upgrade for users who want to modernize their car’s audio setup.

Safety and convenience are also prioritized with the RMD 169. The receiver includes features like a detachable front panel for added security and adjustable brightness settings for the display, making it easier to read in various lighting conditions. Additionally, the unit supports multiple languages, catering to a diverse user base.

Overall, the Blaupunkt RMD 169 combines cutting-edge technology, exceptional sound quality, and user-focused design in a compact and stylish package. Whether you’re an audiophile or a casual listener, this multimedia receiver stands out as an excellent option for enhancing any car audio experience.
Top Page Image Contents