Blaupunkt RMD 169 Prompting the station for the pro- gramme type, Storing the programme type

Page 21
After the beep, the programme type of the station currently being received is displayed.
You can assign a different available pro- gramme type to each memory location.
If no station broadcasting the selected pro- gramme type is found, “NO PTY” appears briefly on the display, and the beep sounds. The last station selected is played.

Radio operation with RDS (Radio Data System)

Prompting the station for the pro- gramme type

On menu level 2:

•Hold PTY down for approx. 2 seconds.

Storing the programme type

A programme type is stored on each of the keys ST1 - ST6 by the factory.

You can however store other available pro- gramme types.

 

 

”PTY” must be displayed before you can

If “NONE” is displayed, the station has no Refer if necessary to the “Saving the pro- store a different programme type.

PTY code.

gramme type” section below.

• If necessary, activate “PTY” using the

 

PTY key.

Displaying the selected programme type

•Press << or >>.

The last programme type selected is dis- played briefly.

Selecting the programme type

a)Using the station keys

If PTY is activated, the programme types defined by the factory can be selected by means of the keys ST 1 - ST 6.

• Press one of the keys 1 - 6.

b)Using the seek run rocker << >>

If PTY is activated, you can select a programme type with << >>.

•Press << or >>: the last programme type selected is displayed for three seconds.

•During this time, select the desired programme type with >> (forwards) or << (back).

•Press << or >> as many times as necessary.

To listen to a station broadcasting this programme type:

•Select the programme type with << >> and

•hold the desired key (ST1- ST6) down until the beep sounds.

The selected programme type can be called up by means of this key when PTY is acti- vated (“PTY” appears on the display).

Sampling stations with PTY-SCAN

Condition: “PTY” must be displayed.

•Press SCA.

The stations with this programme type which can be received are sampled briefly.

The selected programme type appears on the display for two seconds.

To listen to a station broadcasting this programme type:

• Start the seek run with /.

• Start the seek run with /.

If no station broadcasting the selected pro- gramme type is found, “NO PTY” appears briefly on the display, and the beep sounds. The last station selected is played.

Deactivating PTY-SCAN:

•Press SCA or the seek rocker again.

Following a frequency seek run, PTY-SCAN is automatically deactivated.

56

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Dallas RMD 169 Texas DJ 13 12 Contents Condensed instructions Next FM Condensed instructionsNext AM MW, LW BNDMIX ExitRPT Repeat Rocker Radio modeCLR DPEAUD AUD DSC-MODE PTYDisplay DIS= TU Tuner CDCRemote control RC 08 optional Traffic safety Read the following before using Telephone mute UnitAccessories GuaranteeKeyCard anti-theft protection system Switching on the unitRemoving the KeyCard Teaching in a second Key- Card/replacing the KeyCardKeyCard anti-theft protection system Page Radio operation with RDS Radio Data System AF alternative frequencyREG Regional Radio operation with RDS Radio Data System Station tuningSelecting the frequency band Paging through the transmis- sion chains FM onlyChanging the memory level FM Storing stationsCalling up stored stations Seek run Changing the sensitivityNews Activating/deactivating PTYStoring the programme type Prompting the station for the pro- gramme typePTY key Displaying the selected programme type Selecting the programme typePTY priority Activating/deactivating priority for traffic programmes Traffic programme reception with RDS-EONAutomatic seek run Deactivating the warning toneInserting a MiniDisc Activating MiniDisc modeRemoving the MiniDisc MD textActivating CD changer mode MiniDisc mode/CD changer modeSelecting tracks and CDs CDs only in CD changer mode Repeating tracks and CDs CDs only in CD changer modeStoring tracks with TPM Activating/deactivating TPM replayClearing the TPM memory Starting Scan Assigning a name to CDs in CD changer mode onlyEnding Scan MIX OFFDeleting the CD name/TPM store Using DSC-UPDATEDeactivating hours adjustment Setting the timeClock time Displaying the timeEqualizer setting Adjustment instructionsAdjusting the frequency level Equalizer setting Selecting a quality factor for the bassOr mid-range Frequency ranges Tonal effect/problem Measure Bass range Tips on adjusting the equalizerLower mid-range Mid-rangePeak ON/OFF Programming with DSCScroll REGProgramming with DSC 12/24H ModeFM/AM Sens STEREO/MONOEnd DSC programming/store settings Overview of the factory default settings with DSCAmplifier Technical data Glossary Technical TerminologyTuner MuteGlossary Technical Terminology ScanSoftkey Software key Bosch Gruppe

RMD 169 specifications

The Blaupunkt RMD 169 is a sophisticated multimedia receiver that seamlessly blends modern technology with user-friendly features, making it a popular choice for car audio enthusiasts. This unit is designed to enhance the driving experience by providing superior sound quality along with a variety of connectivity options.

One of the standout features of the RMD 169 is its compatibility with multiple media formats. It supports USB flash drives, SD cards, and auxiliary inputs, allowing users to easily connect their smartphones or other devices. This versatility ensures that drivers can enjoy their favorite tracks, whether they are stored on a digital device or streamed directly.

The receiver boasts a crisp, high-resolution LCD display, which provides clear visibility of track information, settings, and system status. The interface is user-friendly, allowing drivers to navigate through songs, playlists, and settings with minimal distraction. Furthermore, the RMD 169 comes equipped with Bluetooth technology, facilitating hands-free calling and audio streaming directly from smartphones.

Sound quality is a prominent highlight of the Blaupunkt RMD 169. The receiver features a robust equalizer with customizable sound settings, enabling users to tailor the audio output to their personal preferences. With a built-in amplifier, the RMD 169 delivers powerful sound while minimizing distortion, ensuring an enjoyable listening experience even at high volumes.

In terms of compatibility, the RMD 169 works seamlessly with a wide range of vehicles and audio systems. Its standard-sized design means it can replace most existing car stereo units without requiring additional modification. The installation process is straightforward, further simplifying the upgrade for users who want to modernize their car’s audio setup.

Safety and convenience are also prioritized with the RMD 169. The receiver includes features like a detachable front panel for added security and adjustable brightness settings for the display, making it easier to read in various lighting conditions. Additionally, the unit supports multiple languages, catering to a diverse user base.

Overall, the Blaupunkt RMD 169 combines cutting-edge technology, exceptional sound quality, and user-focused design in a compact and stylish package. Whether you’re an audiophile or a casual listener, this multimedia receiver stands out as an excellent option for enhancing any car audio experience.
Top Page Image Contents