1.8.3Watchdog timer output (JWDT1)
The
Table 1.4: Watchdog timer output (JWDT1)
Function | Jumper Setting |
NC | |
| |
|
|
* Reset
* default setting
Note! The interrupt output of the watchdog timer is a low level signal. It will be held low until the watchdog timer is reset.
Table 1.5: ATX/AT mode selector (PSON1)
Function | Jumper Setting |
AT Mode | |
| |
|
|
* ATX Mode
* default setting
Table 1.6: COM2
Use JSETCOM2 to select the
12 |