3.5APM Configuration
Figure 3.13 APM Configuration
Power Management/APM
Enable or disable APM.
Power Button Mode
Power on, off or enter suspend mode when the power button is pressed. The follow- ing options are also available.
Power type
Under ACPI mode, select AT or ATX power type.
Restore on AC power Loss
Use this to set up the system after power failure. The "off" setting keeps the system powered off after power failure, the "On" setting boots up the system after failure, and the
Throttle Slow Clock Ratio
Select the Duty Cycle in Throttle mode.
!Resume On Ring: Disable/Enable RI wake event.
!Resume On LAN: Disable/Enable LAN PME wake event.
!Resume On RTC Alarm: Disable/Enable RTC wake event.
Chapter 3 BIOS Operation
53 |