Advantech AIMB-250 Apic Mode, MPS Version Control For OS, OS Select for Dram 64MB, Logo EPA Show

Page 69

User’s Manual

	Item		Description
	System		The system will not boot and access to Setup will be denied if the correct password is
	System		not entered at the prompt.
			not entered at the prompt.
	Setup		The system will boot, but access to Setup will be denied if the correct password is not
	Setup		entered at the prompt.
			entered at the prompt.

Note: To disable security, select PASSWORD SETTING at Main Menu and then you will be asked to enter password. Do not type anything and just press <Enter>, it will disable security. Once the security is disabled, the system will boot and you can enter Setup freely.

3.5.2.12 APIC Mode

The BIOS supports versions 1.4 of the Intel multiprocessor specification. When enabled, The MPS Version 1.4 Control for OS can be activated.

The choice: Enabled/Disabled.

3.5.2.13 MPS Version Control For OS

This feature is only applicable to multiprocessor board as it specifies the version of the Multi-Processor Specification (MPS) that the board will use.

The choice: 1.4, 1.1.

3.5.2.14 OS Select for DRAM > 64MB

Select the operating system that is running with greater than 64MB of RAM on the system.

Item	Description
Non-OS2	Disable OS for over 64 MB DRAM
OS2	Enable OS for over 64 MB DRAM

3.5.2.15 Report No FDD For WIN95

The original Windows95 requires the presence of a floppy. Unless the BIOS tells it to disregard the absence of the drive, it will generate an error message. For other operating systems as Win98 etc this field is without relevance.

Item	Description
No	Don’t generate error message
Yes	Generate error message

3.5.2.16 Full Screen LOGO Show

This item allows to enabled/disabled the full screen logo during BIOS boot up process.

Item	Description
Enabled	Full Screen Logo show is enabled
Disabled	Full Screen Logo show is disabled

3.5.2.17 Logo (EPA) Show

This item allows you enabled/disabled the small EPA logo show on screen at the POST step.

Item	Description
Enabled	EPA Logo show is enabled
Disabled	EPA Logo show is disabled

AIMB-250 User’s Manual 69

Image 69

Contents 1st Ed January Mini-ITX AIMB-250 SeriesCopyright Notice FCC StatementTrademark Acknowledgement AIMB-250 SeriesLife Support Policy DisclaimerMessage to the Customer User’s ManualAdvantech Corp Technical SupportProduct Warranty Contents Bios Setup Memory Size has Changed Since Last Boot Keyboard Error or no Keyboard PresentSystem HALTED, CTRL-ALT-DEL to Reboot Offending Address not FoundHard Disks fail → Unable to recalibrate fixed disk Packing List Safety PrecautionsDocument Amendment History Revision Date CommentJan Initial release Manual Objectives System System SpecificationsDisplay Mechanical & Environmental Architecture Overview Block DiagramUser’s Manual Intel 855GME and ICH4 AIMB-250 Series ECC PCI Interface Dram Interface Intel 855GMEVIA VT1616 Audio Codec 8 USBAIMB-250 Series Chrontel CH7009A TV/DVI Transmitter Page Compact Flash Interface AIMB-250 Series Winbond W83627HFHardware Configuration Product Overview Processor Installation Installing Pentium M CPU Installation ProcedureRemoving CPU Installing the Fan and Heat SinkDIMM1 User’s Manual Main MemoryAIMB-250 Series Jumper and Connector List Label FunctionJP2, JP3 Connectors KBMS1 Setting Jumpers & Connectors 2 COM1 Pin 9 Signal Select JP1 +5V Ring +12VClear Cmos JBAT1 Protect RS-485 RS-485 RS-422 RS-422BIT1 BIT2 OFF ATX Power Connector ATXPWR1Vccsb Pwrok GNDUser’s Manual CPU Fan Connector CFAN1 Signal Description CPU Fan Connector CFAN1TAC Signal Description VGA Connector CN1 AIMB-250 Series Parallel Port Connector & VGA Connector CN1COM RED GND Green DAT Blue Hsync VCC Vsync DCKDCD Serial Port 1 Connector in RS-232 Mode CN1DTR GND DSR RTS CTS DTRAIMB-250 Series Serial Port 1 Connector in RS-422 Mode CN1 Data DATA+ GND Serial Port 1 Connector in RS-485 Mode CN1AIMB-250 Series Audio Connector CN2 Audio-In 12 RJ-45 Ethernet / USB 0 & 1, 4 & 5 Connectors CN3, CN413 4/5/8-Wire Touch Screen Connector CN5, optional GND WPT Rdata SIDE1 Dskchg User’s Manual Floppy Connector FLP1Moatsa AIMB-250 Series Signal Description Floppy Connector FLPUser’s Manual Primary IDE Connector IDE1 AIMB-250 Series Secondary IDE Connector IDE2 IOR# RESET#IOW# IordyAIMB-250 Series LCD Inverter Connector JBKL1 Signal Description LCD Inverter Connector JBKL1GND Enbkl User’s Manual CD-ROM Audio Input Connector JCD1 Signal Description CD-ROM Audio Input Connector JCD1Serial Port 2 Connector JCOM1 JCOM2 JCOM3 AIMB-250 Series Serial Port 3/4 Connector JCOM2, JCOM3Signal Description Digital Input / Output Connector JDIO1 Digital Input / Output Connector JDIO1Smbclk SmbdataAIMB-250 Series Front Panel Connector JFP1 Signal Description Front Panel Connecter JFP1HDD LED Signal Description IrDA Connecter JIR1 User’s Manual IrDA Connector JIR1Irrx GND Irtx IrrxSignal Description Lvds Connector JLVDS1 AIMB-250 Series Lvds Connector JLVDS12CDAT 2CCLK GND 2CDAT, I 2CCLKSignal Description Miscellaneous Setting Connecter JMISC1 User’s Manual Miscellaneous Setting Connector JMISC1CASEOPEN# VTIN3 GND Thrmdn #MASTERSignal Description Tmds Connecter JTMDS1 AIMB-250 Series Tmds DVI Connector JTMDS1Signal Description TV Out Connecter JTV1 User’s Manual TV Out Connector JTV1Tvcvb GND TVYFCC2 TVCFCC2 TvcvbAIMB-250 Series USB Connector 2 & 3 JUSB1 USB Connector 4 & 5 JUSB2Signal Description USB Connecter 2, 3, 4 & 5 JUSB1, JUSB2 Signal Description System Fan Connector SFAN1, SFAN2 System Fan Connector 1 & 2 SFAN1, SFAN2Bios Setup Starting Setup Press DEL to enter SetupPress F1 to Continue, DEL to enter Setup Navigating Through The Menu Bar Using SetupCase of Problems Getting HelpUser’s Manual To Display a Sub Menu Main Menu Main Menu Selection User’s Manual Standard Cmos FeaturesIDE Adapter Setup CPU Feature User’s Manual Advanced Bios FeaturesQuick Power On Self Test Virus WarningBoot Up NumLock Status Select power on state for NumLock AIMB-250 Series First/Second/Third/Other Boot DeviceTypematic Rate Setting Swap Floppy DriveMPS Version Control For OS Apic ModeOS Select for Dram 64MB Report No FDD For WIN95Active to Precharge Delay AIMB-250 Series Advanced Chipset FeaturesDram Timing Selectable CAS Latency TimeDram Data Integrity Mode User’s Manual Dram RAS# to CAS# DelaySystem Bios Cacheable Video Bios CacheableDelay Prior to Thermal Delayed TransactionAIMB-250 Series Memory Hole At 15M-16M AGP Aperture Size MBOnChip IDE Device User’s Manual Integrated PeripheralsIDE Onboard DeviceUser’s Manual Super IO Device 2E8/IRQ3, Auto Watch Dog TimerECP+EPP IRQ3, IRQ4, IRQ5Power Management User’s Manual Power Management SetupAcpi Function Acpi Suspend TypeResume By Alarm Power On By RingAIMB-250 Series Modem Use IRQ Soft-Off by PWR-BTTNReset Configuration Data User’s Manual PnP / PCI ConfigurationResources Controlled By PCI / VGA Palette SnoopCase Open Warning AIMB-250 Series PC Health StatusAuto Detect PCI Clk User’s Manual Frequency / Voltage ControlSpread Spectrum CPU Host / 3V66 / PCI ClockLoad Optimized Defaults AIMB-250 Series Load Fail-Safe DefaultsUser’s Manual Set Supervisor / User Password Save & Exit Setup Password DisabledUser’s Manual Exit Without Save Drivers Installation Install Driver StepUser’s Manual Click AIMB-250 Mechanical Drawing Unit mm Award Bios Post Error Messages OverviewPost Beep Eisa Configuration Is Not Complete Eisa Configuration Checksum ErrorMemory Address Error at User’s Manual Invalid Eisa ConfigurationMemory parity Error at Memory Verify Error atShould Be Empty But Eisa Board Found Should Have Eisa Board But Not FoundSlot Not Empty Bios ROM checksum error System halted Keyboard error or no keyboard presentUser’s Manual Wrong Board In Slot Manufacturing Post loopAIMB-250 Series Post Codes 40.1Normal Post CodeE1-EF User’s Manual AIMB-250 Series User’s Manual AIMB-250 Series AIMB-250 User’s Manual101 AIMB-250 Series 40.2Quick Post Codes AIMB-250 User’s Manual103 SMI AIMB-250 Series 40.3S4 Post Codes40.4BootBlock Post Codes