3.6.12 Onboard LAN1 Control | 54 |
3.6.13 Onboard LAN2 Control | 54 |
3.6.14 Capture Controller | 54 |
3.6.15 Onboard Serial Port 1 | 54 |
3.6.16 Onboard Serial Port 2 | 54 |
3.6.17 UART Mode Select | 55 |
3.6.18 RxD, TxD Active | 55 |
3.6.19 IR Transmission Delay | 55 |
3.6.20 UR2 Duplex Mode | 55 |
3.6.21 Use IR Pins | 55 |
3.6.22 Watch Dog Timer Select | 55 |
3.7 Power Management Setup | 56 |
3.7.1 PCI Express PM Function | 57 |
3.7.2 ACPI Function | 57 |
3.7.3 Power Management | 57 |
3.7.4 Video Off Method | 57 |
3.7.5 Video Off In Suspend | 57 |
3.7.6 Suspend Type | 58 |
3.7.7 Modem Use IRQ | 58 |
3.7.8 Suspend Mode | 58 |
3.7.9 HDD Power Down | 58 |
3.7.10 | 58 |
3.7.11 PowerOn by LAN | 58 |
3.7.12 CPU | 58 |
3.7.13 PowerOn by Modem | 58 |
3.7.14 PowerOn by Alarm | 58 |
3.7.15 Primary IDE 0 (1) and Secondary IDE 0 (1) | 58 |
3.7.16 FDD, COM, LPT PORT | 59 |
3.7.17 PCI PIRQ | 59 |
3.7.18 PWRON After | 59 |
3.8 PnP/PCI Configurations | 60 |
3.8.1 Reset Configuration Data | 60 |
3.8.2 Resources Controlled By | 60 |
3.8.3 PCI / VGA Palette Snoop | 60 |
3.8.4 Maximum Payload Size | 60 |
3.9 PC Health Status | 61 |
10