3.7.6 Suspend Type
The choices are “Stop Grant” and “PwrOn Suspend”.
3.7.7 Modem Use IRQ
This determines the IRQ that the MODEM can use.The choices are “3”, “4”, “5”, “7”, “9”, “10”, “11”, and “NA”.
3.7.8 Suspend Mode
This item allows user to determine the time of system inactivity, all devices except the CPU will be shut off.
3.7.9 HDD Power Down
This item allows user to determine the time of system inactivity, the hard disk drive will be powered down.
3.7.10 Soft-Off by PWR-BTTN
If you choose
(for less than 4 seconds) will switch the system to “suspend” mode.
3.7.11 PowerOn by LAN
This item allows you to power on the system by LAN. The choices are “Enabled” and “Disabled”.
3.7.12 CPU THRM-Throttling
This option controlls the CPU speed as a percentage of regular power. the choices are 87.5%, 75%, 62.5%, 50%, 37.5%, 25% .12% and 12.5%.
3.7.13 PowerOn by Modem
To enabled or disable the function to power on the system via a Modem connection from a remote host. The choice “Enabled” and “Disabled”.
3.7.14 PowerOn by Alarm
The choices are “Enabled” and “Disabled”. Fields that follow below indicate date of current month and time of alarm settings, if enabled.
3.7.15 Primary IDE 0 (1) and Secondary IDE 0 (1)
When Enabled, the system will resume from suspend mode if Primary IDE 0 (1) or Secondary IDE 0 (1) becomes active. The choices are “Enabled” and “Disabled”.
58