Advantech PCI-1625U user manual Verifying Driver Installation, Tion port numbers

3.3 Verifying Driver Installation

After you have installed your card, go to Control Panel/System/Device Manager to look for the Device Name and COM port that are supposed to appear after you have installed the driver.

Note:	If your device has not been properly installed,
	there will be an exclamation mark (!) on the
	device name to indicate a conflicting device. If
	this is the case, just remove that device and start
	the driver installation process all over again.
	After driver uninstall is completed, you must
	restart your system to re-assign the communica-
	tion port numbers.

You can check the card properties by double-clicking the specific device configuration you want to see. On the General tab, you can see the loca- tion information that means your card is installed in which PCI slot on the board.

17 Chapter3