The Performance Listing Area
Port | The com port number |
Rx length | Received packet length in bytes |
Bytes/Sec | Transmission rate in Bytes/Sec |
Last Abnormal Status | Last abnormal status |
Stop the Test
If you want to stop the test on a specific port, just click Port Stop
but- ton or access Port/Stop menu command (or if you want to stop test on all
ports, just click All Ports Stop 
button or access All Ports/Stop menu command).
You can restart the test by clicking the Run
button or accessing the Port/Run menu command (or if you want to run all ports at once, just
click the All Ports Run 
button or access All Ports/Run menu com- mand).
4.4.3 Close Port
If you want to close a port, just select the Com Port tab and click Port Close button or access Port/Close menu command to close the port.
4.4.4 Exit the ICOM Tools utility
To exit the ICOM Tools utility, simply access Port/Exit menu command or click the Close button on the upper right corner of the program win- dow.
34 |