Advantech PCI-1625U user manual Features, Specifications, Data Bits 5, 6, 7 Stop Bits 1, 1.5

Page 11

1.2Features

•Intelligent 8-port RS-232 serial communication card

•Effectively reduce host CPU loading

•Speeds up to 921.6 kbps

•Onboard 1 MB memory buffer to reduce host CPU loading

•High data throughput rate

•PCI bus specification 2.2 compliant

•PCI universal card (both 3.3 V and 5 V signals)

•I/O address automatically assigned by PCI Plug & Play

•OS supported: Windows 2000/XP

1.3Specifications

•Processor: TMS320C5402 DSP

•Memory: 1 MB

•Communication Controller: 8 x 16c550c UART

•Serial Interface: 8-portRS-232

•Speed (bps): 50 bps ~ 921.6 kbps

•Bus Interface: PCI bus specification 2.2 compliant

•IRQ: all ports use the same IRQ assigned by PCI Plug & Play

•Data Bits: 5, 6, 7, 8

•Stop Bits: 1, 1.5, 2

•Parity: none, even, odd

•Data Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND

•ESD Protection: 16 kV

•Dimensions: 175 x 100 mm

•Power Consumption: Typical 504 mA, Max 558 mA

•Operating Temperature: 0~ 60° C (32~140° F)

•Storage Temperature: -25 ~ 85° C (-13~185° F)

•Operating Humidity: 5 ~ 95%, relative humidity, non-condensing Note: PCI-1625U does not support RAS service via crossover RS-232

3

Chapter1

Image 11
Contents Port Intelligent RS-232 Universal PCI Communication Card PCI-1625UCopyright Acknowledgements Product Warranty 2 years FCC Class a Technical Support and Assistance Packing List Safety Precaution Static ElectricityPage Contents Pin Assignments & Wiring Introduction Description Operating Temperature 0~ 60 C 32~140 F FeaturesSpecifications ESD Protection 16 kV Dimensions 175 x 100 mmPCI Intelligent Communication Card AccessoriesOrdering Information Hardware Configuration Initial Inspection Card Installation Page Driver Setup Installation Introduction Driver SetupSteps for Windows 2000/XP Driver Setup Page Page Page Page Click Finish to complete the installation Tion port numbers Verifying Driver InstallationPage Page Removing PCI Icom Series Device You must remove all used ports setting and device Driver Uninstallation Icom Tools Installation All Ports Submenu User Interface of Icom ToolsMenu Bar Tool Bar Transfer Modes Com Port TabMessage Logo Port StatusStatus Bar Tx Slide BarPerformance Listing Area Port Selection Using the Icom Tools UtilitySelect Port dialog box Icom Tools User Interface Configuring a PortTest Information on the Performance Listing Area Run the TestStop the Test Close PortExit the Icom Tools utility Performance Listing AreaStatus Bar Messages Messages on Status Bar and Message Logo AreaMessage Logo Messages Pin Assignments & Wiring PCI-1625U Pin AssignmentsPCI-1625U RS-232 Mode DB62 Pin Description PCI-1625U with OPT8BP, OPT8C PCI-1625U with OPT8APPCI-1625U with OPT8FP PCI-1625U with OPT8HWiring Modem Connections