Contents
Chapter 1 | General Information | 1 | |
1.1 | Introduction | 2 | |
1.2 | Features | 2 | |
1.3 | Specifications | 2 | |
1.4 | Board layout: dimensions | 4 | |
| Figure 1.1 | Board layout: dimensions (component side) | 4 |
| Figure 1.2 | Board layout: dimensions (solder side) | 4 |
Chapter | 2 | Installation | 5 | ||
| 2.1 | Jumpers | 6 | ||
|
|
| Table 2.1: Jumpers | 6 | |
|
| 2.1.1 | Jumpers setting drawing | 6 | |
|
|
| Table 2.2: J1: LCD Voltage Select | 6 | |
|
|
| Table 2.3: J2: PC104+ VIO Select | 6 | |
|
|
| Table 2.4: J3: Clear CMOS function Select | 6 | |
|
|
| Table 2.5: J5: COM2 RS 232/422/485 Select | 7 | |
| 2.2 | Connectors | 8 | ||
|
|
| Table 2.6: Connectors | 8 | |
| 2.3 | Locating jumpers and Connectors | 9 | ||
|
|
| Figure 2.1 Jumper & Connector (component side) | 9 | |
|
|
| Figure 2.2 Jumper & Connector (solder side) | 9 | |
| 2.4 | Setting Jumpers | 10 | ||
| 2.5 | Clear CMOS (J3) | 10 | ||
| 2.6 | Installing DIMMs | 11 | ||
| 2.7 | IDE, CDROM hard drive connector (CN15) | 11 | ||
|
| 2.7.1 | Connecting the hard drive | 11 | |
| 2.8 | Solid State Disk | 11 | ||
|
| 2.8.1 | CompactFlash (CN30) | 11 | |
| 2.9 | Floppy drive connector (CN14) | 12 | ||
|
| 2.9.1 | Connecting the floppy drive | 12 | |
| 2.10 | Parallel port connector (CN16) | 12 | ||
| 2.11 | Keyboard and PS/2 mouse connector (CN27) | 12 | ||
| 2.12 | Front Panel Connector (CN22) | 13 | ||
|
| 2.12.1 | Power & HDD LED (pin | 13 | |
|
| 2.12.2 | Reset switch (pin | 13 | |
| 2.13 | Power connectors (CN25,CN5) | 13 | ||
|
| 2.13.1 | ATX power connector, +5V (CN5) | 13 | |
|
| 2.13.2 | CPU Fan power supply connector (CN25) | 13 | |
| 2.14 | ATX power ON/OFF switch con. pin | 13 | ||
|
| 2.14.1 | ATX feature (CN5) & soft power switch (CN22) | 13 | |
| 2.15 | Audio AC'97 Link interfaces (CN4) | 14 | ||
|
| 2.15.1 | Audio connector(CN4) | 14 | |
|
| 2.15.2 | CD | 14 | |
| 2.16 | COM port connector (CN21) | 14 | ||
| 2.17 | VGA/LVDS interface connections (CN7, CN8,CN9) | 14 | ||
|
| 2.17.1 | CRT display connector (CN7) | 14 | |
|
| 2.17.2 | LVDS LCD panel connector (CN8) | 14 | |
|
| 2.17.3 | DVI LCD panel connector(CN9) | 15 | |
|
|
| Table 2.7: CN9: DVI connector | 15 | |
| 2.18 | 15 | |||
| 2.19 | Ethernet configuration (CN11) | 15 | ||
|
| 2.19.1 | 15 | ||
|
| 2.19.2 | Network boot | 15 | |
|
|
| v |