Advantech PCM-9587 TV-out interface CN2 TV out optional by request, Ethernet configuration CN11

2.17.3DVI LCD panel connector(CN9)

Digital Visual Interface (DVI) is the standard interface for high-performance connec- tion between PCs and Flat Panel Displays, Digital CRT displays, Projectors, and HDTV. The PCM-9587 is able to drive a DVI connector display at a pixel resolution up to 1600 x 1200 at 85Hz.

Panel type and Resolution mode selection

Customer can select display type and boot number from BIOS menu selection.

Table 2.7: CN9: DVI connector

PIN	Signal	PIN	Signal
1	C0#	2	VCC_DVI
3	C0	4	CK#
5	GND	6	CK
7	C1#	8	GND
9	C1	10	DVI_CLK
11	GND	12	DVI_DATA
13	C2#	14	HP_DET
15	C2	16	MI2C_DATA
17	VCC_DVI	18	MI2C_CLK
19	NC	20	NC

2.18TV-out interface (CN2) (TV out optional by request)

The PCM-9587 board provides TV-out function via CN2. This consists of a 5-pin wafer box header. Output supports composite video, S-video and SCART(RBG). TV- out generators use both NTSC and PAL formats.It supports up to 1024 by 768 with full vertical and horizontal underscan capability.

To set up your video interface run the appropriate installation program located on the utility disk.

2.19Ethernet configuration (CN11)

The PCM-9587 is equipped with a high performance 32-bit PCI-bus Ethernet inter- face which is fully compliant with IEEE 802.3U 10/100Mbps CSMA/CD standards. It is supported by all major network operating systems.

2.19.1100Base-T connector (CN11)

10/100Base-T connects to the PCM-9587 via an adapter cable to a 10-pin polarized header (CN11).

2.19.2Network boot

The Network Boot feature can be utilized by incorporating the Boot ROM image files for the appropriate network operating system. The Boot ROM BIOS files are included in the system BIOS, which is on the utility CD disc.

Chapter 2 Installation

15 PCM-9587 User Manual