Advantech CP-150 manual How to pack away the keyboard

How to pack away the keyboard

Follow the same procedure to pack the keyboard back into the portable enclosure in a reverse manner. Note that the keyboard cable should be put back into its proper lodging location. Make sure the two locking mechanisms are properly secured after it is put back.

What to look for

The keyboard cable is located on the top portion of the keyboard. It is a coil cable with a RJ-45 connector at one end. The jack should now be removed and attached to the portable enclosure (at the lower right hand corner) to be operational.

Keyboard usage

The keyboard is the principal medium for inputting data into the system. The keyboard of the ACP 661 series portables contains both a keyboard and a touch pad. The keyboard is a 108-key Windows-ready keyboard with power function and shortcut keys.

Keyboard position

You may want to adjust the keyboard angle by tilting the feet of the keyboard located at the bottom

Figure 2-4

TOUCHPAD operation

You can use the TOUCHPAD to move the cursor in the GUI environment by placing your finger on the surface and moving your finger as you would move the cursor. The two buttons located below the touch pad function like

CP-150 User Manual --- Page 8