Advantech CP-150 manual PXI slot unit Power supply

2.4.3 Installing a 3.5” Hard Disk Drive

Follow this procedure to install 3.5" hard disk drives in the CP-150:

1.Loosen the screws and remove the mobile rack.

2.Mount the HDD on the mobile rack, and fasten with screws.

3.Slide the HDD with mobile rack back into the tray and screw them.

4.Power on and check the HDD can be found when the SCSI is initialized.

2.4.4Remove the Slot Unit

Open back cover

Unscrew the screws on the back cover. The screws are well-designed so they can’t easily be removed from the back cover.

Prepare to remove the slot unit

PXI slot unit

Power supply

Figure 2-11

CP-150 User Manual --- Page 15