Advantech CP-150 guide

the peripheral slots have logical numbers 2~5. The connectors in logical slot 1 are designated as 1-P1, 1-P2, and 1-P3 from the bottom up.

Nomenclature for connectors in the other slots is similar, such as 2-P1 and 2-P2. Connector P1 on the system slot is a keyed connector providing a 32-bit CompactPCI™ bus between the system slot and the peripheral slot. Connector P2 on the system slot is an un-keyed connector providing a 64-bit CompactPCI™ bus between the system slot and the peripheral slots. Connector P3 on the system slot is open for user definition.

Please check appendix A for the pin assignment for all the connectors on the backplane.

Table 3-1 : MIC-3800 System to peripheral slot signal assignment.

System Slot (Logical Slot 1)		Peripheral Slot (Logical Slot 2)
CLK0	P1:D6	CLK	P1:D6
AD31	P1:E6	IDSEL	P1:B9
REQ0#	P1:A6	REQ#	P1:A6
GNT0#	P1:E5	GNT#	P1:E5
System Slot (Logical Slot 1)		Peripheral Slot (Logical Slot 3)
CLK1	P2:A1	CLK	P1:D6
AD30	P1:A7	IDSEL	P1:B9
REQ1#	P2:C1	REQ#	P1:A6
GNT1#	P2:D1	GNT#	P1:E5
System Slot (Logical Slot 1)		Peripheral Slot (Logical Slot 4)
CLK2	P2:A2	CLK	P1:D6
AD29	P1:B7	IDSEL	P1:B9
REQ2#	P2:E2	REQ#	P1:A6
GNT2#	P2:D2	GNT#	P1:E5
System Slot (Logical Slot 1)		Peripheral Slot (Logical Slot 5)
CLK3	P2:B2	CLK	P1:D6
AD28	P1:C7	IDSEL	P1:B9
REQ3#	P2:E2	REQ#	P1:A6
GNT3#	P2:C3	GNT#	P1:E5
System Slot (Logical Slot 1)		Peripheral Slot (Logical Slot 6)
CLK4	P2:A3	CLK	P1:D6
AD27	P1:E7	IDSEL	P1:B9
REQ4#	P2:D3	REQ#	P1:A6
GNT4#	P2:E3	GNT#	P1:E5

CP-150 User Manual --- Page 25

System Slot (Logical Slot 1)

Peripheral Slot (Logical Slot 2)