Advantech CP-150 manual ATX Power Connector ATX1

ATX1 CN9

CN10 CN13 CN12

CN11	CN7
	CN2

JP1

JP2

JP3

JP4

JP5

JP9JP10 JP6

Figure 3-2: The connector and jumper locations on the rear side. (MIC-3800)

3.5.1 ATX Power Connector (ATX1)

This connector accepts one standard ATX power supply.

Note: Do not use the ATX power supply and the plug-in power module at the same time.

3.5.2 Power Switch

This connector provides power control of the ATX power supply or the plug-in power module. If the CompactPCI™ chassis provides a 2-pin power switch cord, connect this cord to the JP1 connector to turn the power on or off by the power switch. Or, you can directly bypass this connector by using a jumper and 2-pin connector to control the power through the ATX power supply cord.

3.5.3 Fan Module Connector

The FAN connectors provide +12 V power for fan operation and relay the tachometer output from the fans.

CP-150 User Manual --- Page 27