Accton Technology ES4324 manual Rack Mounting

Page 31

Mounting 3

Mounting

A switch unit can be mounted in a standard 19-inch equipment rack or on a desktop or shelf. Mounting instructions for each type of site follow.

Rack Mounting

Before rack mounting the switch, pay particular attention to the following factors:

•Temperature: Since the temperature within a rack assembly may be higher than the ambient room temperature, check that the rack-environment temperature is within the specified operating temperature range (see page C-1).

•Mechanical Loading: Do not place any equipment on top of a rack-mounted unit.

•Circuit Overloading: Be sure that the supply circuit to the rack assembly is not overloaded.

•Grounding: Rack-mounted equipment should be properly grounded. Particular attention should be given to supply connections other than direct connections to the mains.

To rack-mount devices:

1.Attach the brackets to the device using the screws provided in the Bracket Mounting Kit.

21

22

23

24

Figure 3-2 Attaching the Brackets

3-3

Image 31

Contents Powered by Accton Page Port Gigabit Lite Switch ES4324 E092007-AP-R01 150200057600A Compliances and Safety Warnings CE Mark Declaration of Conformance for EMI and Safety EEC Safety Compliance Or Nema 6-15P 15 A, 250 V configuration France et Pérou uniquement Die Aufschrift HAR oder Basec tragen Environmental Statement Viii Contents Appendix B Cables Appendix a TroubleshootingAppendix C Specifications Making Network ConnectionsTables Figures Overview Introduction10/100/1000BASE-T Ports Switch ArchitectureDescription of Hardware Network Management OptionsLED Port and Power Status LEDsExpandability Features and BenefitsPower Supply Socket ConnectivityManagement Introduction Network Planning Introduction to SwitchingCollapsed Backbone Application ExamplesCentral Wiring Closet Central Wiring ClosetRemote Connections with Fiber Cable Remote Connections with Fiber CableVlan Making Vlan ConnectionsApplication Notes Selecting a Site Installing the SwitchEthernet Cabling Package Contents Equipment ChecklistOptional Rack-Mounting Equipment Rack Mounting MountingDesktop or Shelf Mounting Installing the Switch in a RackInserting an SFP Transceiver into a Slot Installing an Optional SFP TransceiverPower Socket Connecting to a Power SourceCabling Guidelines Connecting Network DevicesMaking Network Connections Twisted-Pair DevicesMaking Twisted-Pair Connections Connecting to PCs, Servers, Hubs and SwitchesWiring Closet Connections Network Wiring ConnectionsFiber Optic SFP Devices Making Connections to SFP Transceivers 1000BASE-T Cable Requirements Connectivity RulesMbps Gigabit Ethernet Collision Domain Mbps Ethernet Collision Domain Mbps Fast Ethernet Collision DomainCable Labeling and Connection Records Diagnosing Switch Indicators Appendix a TroubleshootingPower and Cooling Problems In-Band Access InstallationTwisted-Pair Cable and Pin Assignments Appendix B Cables10BASE-T/100BASE-TX Pin Assignments Cables Straight-Through Wiring1000BASE-T Pin Assignments Crossover WiringAdjusting Existing Category 5 Cabling to Run 1000BASE-T Cable Testing for Existing Category 5 CableFiber Standards Physical Characteristics Appendix C SpecificationsManagement Features Switch FeaturesStandards Compliances Specifications Glossary Full Duplex End StationEthernet Fast EthernetLayer Media Access Control MACIeee 802.3z LAN SegmentTransmission Control Protocol/Internet Protocol TCP/IP Redundant Power Supply RPSRJ-45 Connector Switched PortsNumerics IndexIndex-2 Page ES4324 E092007-AP-R01 150200057600A