Accton Technology EH1502S manual Threshold, Management agent, Trap Managers, Save Configuration

EtherHub 1500 System

Menu	Description	(continued)
Threshold	Provides 5 sub-menus - System, Any Hub, Any Port, Select Hub and Select Port.
	This menu allows you to set threshold levels for the hub or port in terms of frames
	received, number of bytes, collisions, CRC errors, alignment errors and total errors.

System Menu

Menu	Description
Information	Displays EtherHub system information.
Configuration	Modifies various parameter settings necessary for communicating with
	the management agent.
Trap Managers	Selects management stations to receive trap messages from the system.
Download	Downloads a binary file to the SNMP agent.
Restart	Resets the SNMP agent.
Factory Settings	Reverts all configuration settings to the original factory settings.
Save Configuration	Saves the configuration changes made during the current session.
Reset Configuration	Restores the last saved configuration.

Displaying System Information - Use the Information command to display and modify system information about the EtherHub stack, or for quick system identification. View a description of the system, including:

Field	Description
System Description	Name and version of the EtherHub-16mi+software.
System Uptime	Length of time the EtherHub management agent has been running.
System Name	Name assigned to the EtherHub system.
Contact	Contact person for the system.
Location	Specifies the area or location where the system resides.

Advanced Reference Guide

Changing System Configuration - Use the Configuration command from the System Menu to modify current values for the following parameters:

Field	Description
IP Address	IP address of the agent you're managing. The EtherHub system may
	be run on SNMP protocol over UDP/IP transport protocol. In this
	environment, all systems on the Internet, such as network interconnection
	devices and Network Management Stations (e.g., the PC running
	AccView) are assigned an IP address.
MAC Address	Hardware address of EtherHub-16mi+.
Subnet Mask	Subnet mask of the agent you've selected. This mask identifies the
	host address bits used for routing to specific subnets.
Default Gateway	Default gateway used in passing trap messages from the EtherHub
	agent to the management station.
Default NMS	For internal use only.
NMS-Download File	For internal use only.
IPX Frame Type	The selected format used on the LAN; i.e., type used by the IPX
	network where the EtherHub-16mi+is installed. If the specified frame
	type is not detected, the EtherHub-16mi+will automatically detect the
	current type. (Values: 802.3, Ethernet II, SNAP, 802.2)
IPX Network Number	Identifies the IPX network number for the connected slot. You can
	disable IPX protocol by setting this number to zero.

Assigning Trap Managers - Use the Trap Managers command from the System Menu to modify current values for the following parameters:

4 5