Accton Technology EN2218 manual Connecting the Adapter Cable to the PC Card, Y-Cable

Page 13

Ethernet+Modem/Fax PC Card User’s Guide

Connecting the Adapter Cable to the PC Card

1.Plug the wide connector on the end of the Y-cable to the mating connector on the PC Card. Make sure the side of the Y-cable connector with the arrow heads faces upwards. The cable connectors and card should seat exactly and click into place. The Y-cable is shown in the following figure:

Figure 2.1 Y-Cable

The Y-cable serves both as a LAN and modem adapter cable. It uses a dual function twin cable. One is fitted with an RJ-11 plug and the other with an RJ-45 plug.

2.Plug the RJ-11 male connector into an analog telephone wall jack.

3.Plug the RJ-45 male connector into an RJ-45 network connection.

2-2 Installation

Image 13

Contents Multi-Function Ethernet + Modem/Fax PC Card User’s Guide Multi-Function Ethernet + Modem/Fax PC Card User’s Guide International Headquarters About this Manual Package ContentsIi About this Manual Quick Installation Guide Page Contents Chapter Modem/Fax Setup Fax Operations List of Tables List of FiguresIntroduction FeaturesChapter Pre-Installation Considerations InstallationInstalling the Hardware PC Card InstallationY-Cable Connecting the Adapter Cable to the PC CardRunning Card Diagnostics Installing the SoftwareCard and Socket Services Support Client Software Driver InstallationActivating the PC Card Software Installation AdvisoryUsing Client Drivers Using Card and Socket Services SupportInstalling under DOS LSL.COM IPXODI.COM NETX.EXE VLM.EXE CHGDRV.COM Installing under Windows for Workgroups WFW LAN IOBase=300 COM3 I/OBase=3E8, IRQ=4 Installing under Windows Installing under Windows NT Removing the PC Card Getting Started Using 1StepTM1STEP Enter Overview of 1StepSelecting the I/O Base Address Setting the Hardware ConfigurationSelecting the Interrupt Running Diagnostics Available Diagnostic Tests Setting the Software ConfigurationSelecting the Network OS Selecting the Frame Type Selecting the DriverInstalling the Software Driver Menu Bar CommandsSelecting Memory Management Options Identifying the Driver’s Directory LocationHelp Menu Action MenuModem/Fax Setup Ethernet+Modem/Fax PC Card User’s Guide Ethernet+Modem/Fax PC Card User’s Guide Transmitting Faxes Fax OperationsReceiving Faxes Sending and Receiving LogsEthernet Network Interface TroubleshootingAppendix a Symptom SymptomsTroubleshooting A-3 Modem Table A.1 Common Modem Problems and Possible SolutionsTroubleshooting A-5 Appendix B Modem AT Commands and S-RegistersModem AT Commands and S-Registers ATX0 ATX1 ATX2 ATX3 ATX4 ATY0 ATY1 ATZ0 ATZ1 AT&C0 AT&C1 AT&D0 AT&D1 AT&D2 AT&D3 AT&F0 AT&F1 AT&W AT&W1 AT%E0 AT%E1 AT%E2 AT%Q Table B.2 S-Register Summary System Configuration SpecificationsAppendix C EthernetHardware Certification Operating EnvironmentModem Appendix D Regulatory Standards ConformanceEMI Warning Ethernet+Fax/Modem PC Card User’s Guide Regulatory Conformance DeclarationEthernet+Fax/Modem PC Card User’s Guide Problem Report Product Support ServicesHardware Repair Service Appendix EBulletin Board Service BBS Software Update and Upgrade ServiceInteractive Fast Fax U.S.A. office Technical SupportFor all countries except North America Limited Warranty Limited Five Year WarrantyCustomer Remedies Return Process Warranty InformationOrdering Information Accton Offices10BASE-T GlossaryMbps Index OEMSETUP.INF XON/XOFF EN2218 E1196-R03