Ethernet+Modem/Fax PC Card User’s Guide
Symptoms
1.
2.Running Test Adapter results to External Loopback Test failure.
Possible Cause
Invalid
Suggestions
1.Check the
2.Check for wrong
Symptom
Ethernet PC Card failure; suddenly cannot log into the network.
Possible Causes
1.Bad cable connection
2.Ethernet PC Card not properly installed in PCMCIA slot
3.Host PC’s slot defective
4.Resource conflict
Suggestions
1.If you’re using the
2.Check if the Card is properly inserted in the PCMCIA slot; it may have been accidentally loosened.
3.Install the PC Card in another PC, or install it in another slot. If the problem is eliminated, then the original PC’s slot is defective. Contact your PC vendor for assistance.
4.Check if there is a resource conflict in your CONFIG.SYS file, I/O address or IRQ settings.