Ethernet+Modem/Fax PC Card User’s Guide
Installing the Software
Running Card Diagnostics
When hardware installation is complete, run diagnostics to check the card and the network cabling with the 1Step program. 1Step is in the root directory of the driver diskette that comes with the package. Run diagnostics by selecting the Test Adapter command from the Action Menu. For more information, see Chapter 3 on Using 1Step.
Card and Socket Services Support
Portable PCs with one or more PCMCIA slots normally have a PCMCIA socket controller chip
Client Software Driver Installation
The driver diskette contains all the software driver programs supported by the adapter. Refer to the RELEASE.TXT file for a listing of these programs. In addition to the 1Step utility, special DOS commands, software drivers and README.TXT files, the driver diskette contains a RELEASE.TXT file. It is located in the root directory of the diskette, and provides information about the driver diskette’s contents. Use the DOS TYPE command or Windows File Manager to check the contents of the file.
If your network operating system is NetWare or NDIS, use 1Step to install the corresponding driver. The driver installation programs for each operating system are contained in separate subdirectories. Refer to the.TXT file in each subdirectory for driver installation instructions.
From 1Step, press <F1> to get help for installing drivers for network operating systems other than NetWare and NDIS. Refer to Appendix A for a list of approved device drivers.
Installation