Adder Technology AV4OSD manual Other useful installation information

Page 15

H1 - Hotkey combination is CTRL + ALT + command key (default)

H2 - Hotkey combination is CTRL + SHIFT + command key H3 - Hotkey combination is ALT + SHIFT + command key H4 - Hotkey combination is RIGHT ALT + command key

H5 - Hotkey combination is LEFT ALT + RIGHT ALT + command key

H6 - Hotkey combination is LEFT CTRL + LEFT ALT + command key

H7 - Hotkey combination is RIGHT CTRL + RIGHT ALT + command key H8 - No hotkey combination enabled

F1 - Display firmware first digit

F2 - Display firmware second digit

F3 - Display firmware third digit

F5 - Restore PS/2 mouse function

F6 - Restore IntelliMouse function

F8 - RESET all configurations to default settings. (Display confirms with 'r').

P - Sets password - see section 4.8 for instructions.

E - Exits configure mode and returns the AdderView to normal operation mode.

2.8 Other useful installation information

PC boot up sequence - When your PCs are powered on they communicate with any attached keyboards and mice and setup parameters required by the particular operating system. It is necessary for the AdderView to be attached and powered on during this sequence so that it can give the required responses and keep track of all the modes and settings requested by each of the connected PCs.

Mouse characteristics - do not unplug a PS/2 mouse connection from a PC whilst the PC is on. Due to the design of PS/2 mice communications the mouse function on the PC will be lost and you will have to re-boot the PC to regain normal operation. Unplugging the mouse from the AdderView will also cause it to stop operating when it is plugged back in. RS232 mice can usually be unplugged and plugged back in provided that a mouse was connected when the operating system initially booted. The AdderView is fitted with a PS/2 mouse recovery system which allows you to disconnect and re-connect the shared mouse without powering down the system

AdderView

Installation and Use

Page 14

Page 14 Page 16
Image 15
Page 14 Page 16
Contents ADDERView OSD Safety information WarrantyAbout this manual European EMC directive 89/336/EEC Radio Frequency EnergyContents Appendices AdderView configuration optionsIntroduction Key featuresRemote controller contents part code AVremote Rack mount kit contents part code AVrmkAdderView OSD model AV8osd Product informationAdderView OSD model AV4osd What you will need InstallationMounting the AdderView Connecting your devicesConfiguring the AdderView Configuring your PCsTo enter configure mode at power on Summary of AdderView configuration optionsOr IntelliMouse Other useful installation information Re-enabling a disconnected PS/2 mouse AdderView Installation and Use AdderView Installation and Use Power on status Using the AdderViewStatus display Front panel key and remote controllerKeyboard hotkey control AdderView Installation and Use On-screen menu control Adding a computer to the menu list Mouse control RS232 controlCascading AdderViews AdderView Installation and Use AdderView configuration options Screen saver time delayAutoscan ‘lock on’ mode and delay time Mouse mode and mouse switching of channels Keyboard hotkey combination Display appearance options Firmware functions version query, mouse restore and resetOFREDg Setting a security passwordCascade query code Exit configure modeAppendix A. Cable and connector specifications A1. Keyboard, monitor and mouse to AdderViewA2. AdderView to PCs 1 to A3. Expansion port pin assignments Appendix B. Problem Solving Problem AdderView Installation and Use AdderView Installation and Use S TA L L AT I O N & U S E
Top Page Image Contents