AdderViews as this avoids the need to use long hotkey sequences that may be hard to remember. Older style AdderView OSD (blue / white) front panels may be cascaded together with your new style AdderView OSD (black / silver front panel).
For example, consider a situation where two AdderView units are connected together as shown below. To connect to the computer attached to port 3 on AdderView B the user would hold down the hotkey keys then press ‘2’ followed by ‘3’, whilst keeping the hotkey keys pressed. This will have the effect of connecting to port ‘3’ of the AdderView which is connected into port ‘2’ of the first AdderView unit A. For example to connect to port 3 on the AdderView cascaded off port 2 of your first AdderView use:
press ba2release 2
press 3release 3ba
A typical cascade of two AdderViews
AdderView | Installation and Use | Page 25 |