Keyboard and PS/2 mice - 6 pin
RS232 serial mice - these require a special converter to connect the RS232 lines present on the AdderView mouse ports to the RS232 port on a PC.
Cables should be no longer than 30 metres.
A3. Expansion port pin assignments
The 15 way D connector located on the back of the AdderView provides connections for the remote control module and allows an external RS232 device to control the AdderView. See section 3.5 for more details.
Pin 9 = GND |
|
Pin 11 = RXD | Other pins to be left unconnected |
AdderView | Installation and Use | Page 33 |