Adder Technology X2 Installation, Stage a Configuration switch settings, Local module switches

Page 6

Installation and operation

Installation

The installation of the X2 Multi Screen extenders is straightforward and can best be achieved in most cases by following these stages for each module:

•

Stage A

Check or set the configuration switch settings

•

Stage B

Mount the module

•

Stage C

Connect the cables

Stage A - Configuration switch settings

The basic operation of the LOCAL and REMOTE modules are controlled by the banks of four switches located on the side of each module. The switches are monitored at all times and may be changed when power is on or off (the only exception to this rule is switch 1 of the LOCAL module which initiates slightly different functions depending on the power state when it is switched).

LOCAL module switches

 

 

 

 

 

 

OFF: Normal operation

 

 

 

 

 

 

ON: Transparent mode

ON

1

 

 

 

OFF: Normal operation

2

 

ON: Reset LOCAL module

OFF: Normal operation

 

 

 

3

4

 

 

 

 

ON: Flash upgrade/reset

 

 

 

 

 

 

 

 

 

password modes

 

 

 

 

 

 

OFF: Microphone input mode

 

 

 

 

 

 

ON: Stereo line-in mode

 

 

 

 

 

 

N 1

 

 

 

 

 

O

 

2

 

 

 

 

 

 

3

 

 

 

 

 

 

4

 

 

 

 

 

 

 

 

Note: When shipped, all switches are set in the OFF positions and this will produce normal operation with normal microphone input (at the REMOTE module).

LOCAL module switches (continued)

LOCAL Switch 1

OFF: Normal operation.

ON: (Before power is applied) Places the LOCAL module into flash upgrade mode so that the internal software can be changed. Please see the ‘Flash upgrade’ section in the ‘Special configuration’ section.

ON: (Whilst power is applied) Places the REMOTE module into password override mode. This allows any pre-configured passwords to be altered

-particularly useful when they have been lost or forgotten. Please see the ‘Password override’ section in the ‘Special configuration’ chapter.

LOCAL Switch 2

OFF: Normal operation.

ON: Set transparent mode. Use this setting if the X2 Multi Screen modules are to be used with KVM switches that are not manufactured by Adder Technology. Cascaded KVM switches often use special signals to set or identify conditions. In transparent mode, the X2 Multi Screen modules will pass the signals without attempting to interpret them.

LOCAL Switch 3

OFF: Microphone input on REMOTE module. Use this setting if a standard mono- channel microphone is connected to the MIC input on the REMOTE unit.

ON: Stereo line-in input on REMOTE module. Use this setting if a stereo input is applied to the MIC input on the REMOTE unit.

LOCAL Switch 4

OFF: Normal operation.

ON: Suspend operation and reset the LOCAL module. Use this setting momentarily to produce the same effect as removing and restoring power if incorrect operation has occurred. Return the switch to the OFF position to allow normal operation to continue.

        

5

Page 5 Page 7
Image 6
Page 5 Page 7
Contents AdderLink X2 Multi Screen Contents Welcome IntroductionSupplied items X2 Multi Screen MS2X2 Multi Screen MS4 Module features Local module switches InstallationStage a Configuration switch settings Local SwitchRemote module switches Remote SwitchRemote Switches 2 Desk mount Installation AdviceStage B Mounting a module desk or rack Rack mountStage C Connections Connections at the Local moduleAdditional video channel inputs Serial cable connectionsLocal video outputs Power connection optional on MS2 model Twisted pair link connectionsConnections at the Remote module Keyboard and mouse connectionsAudio connections Video outputs Remote modulePower connection Operation Power and activity indicatorsUser arbitration and keyboard indicators General useLocking and unlocking the system To enable the videoTo disable the video To lock the systemTo enter and use configuration mode ConfigurationEntering, using and exiting configuration mode To exit from configuration modeTo set a password Password settingPassword override To override the Remote passwordMicrosoft and Logitech -specific mouse settings Which restore setting do I use?Hot plugging and mouse restoration Image controls sharpness and brightness To display a suitable high contrast imageTo reset all image controls to their default states To use the image controlsIf the image controls cannot provide a crisp image Skew adjustment To use skew adjustmentTo reset all skew adjustments to their default states Miscellaneous settings Reset all configuration options to default statesReport X2 Multi Screen firmware version Stage B Create a startup diskette Flash upgradeStage a Download the upgrade files Copy the downloaded files to the diskStage D Reconfigure the Remote connections and begin Stage E Return all connections to their usual statesOn-screen mouse pointer does not respond to mouse movements TroubleshootingNo video image is received at the Remote module Sound from the microphone cannot be heard or is very quietGetting assistance Support@adder.comProducts in the X2-Series range CablesRadio Frequency Energy European EMC directive 89/336/EECFCC Compliance Statement United States United States of America
Related manuals
Manual 26 pages 59.8 Kb

X2 specifications

Adder Technology X2 is a cutting-edge solution designed to enhance the user experience in KVM (Keyboard, Video, Mouse) extension and switching. This innovative device stands out due to its seamless integration capabilities, providing users a versatile platform to manage multiple computer sources effortlessly. It caters to industries that demand high-performance and reliable KVM solutions, including broadcast, control room applications, and data center operations.

One of the main features of the Adder X2 is its impressive video performance. It supports high-resolution video up to 4K at 60Hz, ensuring that users experience crystal-clear imagery without compromising on quality. This is particularly advantageous for sectors that rely on detailed visuals, such as graphic design and video production. The device also integrates advanced compression technologies, enabling efficient transmission over various distances without lag or degradation of quality.

The Adder X2 is equipped with a robust and flexible architecture, allowing for easy scalability. It can accommodate a wide range of configurations, whether a single workstation or a complex multi-user environment. This means that as a company's needs evolve, the system can be upgraded or modified without requiring a complete overhaul.

Furthermore, its support for various input and output connections, including HDMI, DVI, and DisplayPort, ensures compatibility with a wide array of devices. This flexibility is essential in a fast-evolving tech landscape, where businesses often utilize numerous types of equipment.

Another significant characteristic of the Adder X2 is its user-friendly interface. It features intuitive controls that make switching between devices simple and efficient, minimizing downtime during operations. The device is also designed with security in mind, providing effective measures to safeguard sensitive data from unauthorized access.

In terms of installation, the Adder X2 is designed to be straightforward. Its compact design means it can easily fit into existing infrastructure without taking up additional space. The device can be deployed in both small and large setups, making it an ideal choice for businesses of all sizes.

Overall, the Adder Technology X2 is a powerful and adaptable KVM solution that emphasizes performance, flexibility, and security. Its advanced features and user-centric design make it a preferred choice for professionals in need of reliable and high-quality KVM extension and switching solutions.
Top Page Image Contents