Adder Technology X2 manual Connections at the Remote module, Keyboard and mouse connections

Connections at the REMOTE module

Keyboard and mouse connections

1Connect the keyboard lead to the purple mini-DIN socket labelled on the REMOTE module.

2Connect the keyboard lead to the

green mini-DIN socket labelled on the REMOTE module.

VIDEO	OUT
	1

Connection from keyboard

Note: When the REMOTE module is rack mounted, the audio connections must be made after the module has been fixed in place. Access is required to the rear and above the rack. Remember to remove the audio connections before attempting to slide out the REMOTE module.



REMOTE

Connection from mouse

Audio connections

At the REMOTE module, audio connections are available from the two 3.5” jack sockets mounted on the side (same side as the switch bank). Note: The

microphone input (labelled ) has a dual function whereby it can either support a mono-channel microphone or alternatively receive stereo line input. Switch 3 on the LOCAL module controls the setting of this port: LOCAL switch 3 OFF - microphone, LOCAL switch 3 ON - stereo line in.

ON 1	2
		3	4

 

1Connect the microphone (or stereo line input) plug to the REMOTE

module socket labelled .

Note: Ensure that the setting of switch 3 on the LOCAL module matches the input to this socket: OFF-microphone;

ON-stereo line input).

2Connect the speaker plug to the socket labelled .

Microphone

(or stereo line-in) connection

REMOTE

Speaker

Connection

			POWER
			SERIAL1
SERIAL4	SERIAL3	SERIAL2	CATXLINK1
CATXLINK4	CATXLINK3	CATXLINK2

    

11