Paxar 9800 Series manual B b o n Specification, N e r l e s s S u p p l i e s, O u t R i b b o n s

L i n e r l e s s S u p p l i e s

For Supply Width greater	Use Supply Length
than or equal to
1.5" (38 mm)	1.5" to 16" (38 mm to 406 mm)
2.0" (51 mm)	1.5" to 16" (38 mm to 406 mm)
3.0" (76 mm)	2.0" to 16" (51 mm to 406 mm)
4.0" (102 mm)	2.5" to 16" (64 mm to 406 mm)

A0.50 inch non-print zone exists on the leading edge (beginning) of all labels.

R i b b o n S p e c i f i c a t i o n

Do not leave ribbon in sunlight, high temperatures or humidity.

Ribbon Type:	Standard
Ribbon Widths		Use with Max. supply width
1.5" (38 mm)		1.3" (33 mm)
1.8" (46 mm)		1.5" (38 mm)
2.3" (58 mm)		2.0" (51 mm)
3.3" (84 mm)		3.0" (76 mm)
4.3" (110 mm)		4.0" (102 mm)
Ribbon Length:	23,600 inches (600 meters)

A b o u t R i b b o n s

The width of the ribbon must be greater than the supply width. Since some supplies are more abrasive to printheads than others, using a ribbon wider than your supply helps protect the printhead. Replacement printheads are expensive.

Specifications A-3