Error Codes
Following are some common error codes you may receive and their meanings.
Code(s) | Description | |
|
|
|
004 | – 005 | Supply size is incorrect. Reload the correct supplies. |
|
|
|
267 | – 271 | Communication error. See your System Administrator. |
410 – 413 |
| |
|
|
|
703 | – 704 | Supply Error. Load supplies or make sure they are loaded |
|
| correctly. |
750 |
| Printhead is overheated. Turn off the printer to let it cool. |
|
|
|
751 | – 753 | The printer sensed a problem with a mark on the supplies. |
|
| Check the supplies to see if they are loaded correctly. |
|
|
|
756 |
| The printer is out of supplies. Load supplies. |
|
|
|
757 |
| Load supplies. The calibrated supply length differs by plus |
|
| or minus .25 inches from the format. |
|
|
|
758 |
| Supply error. Check for a label jam. Clear the supply path |
|
| or reload supplies. |
|
|
|
762 |
| Low battery. Recharge the battery. |
|
|
|
763 |
| Waiting to dispense label. Press Enter. |
|
|
|
768 |
| Printhead error. See your System Administrator. |
|
|
|
790 | – 791 | The printer is busy or has an error pending. Turn off the |
|
| printer. Wait two seconds and turn it back on. |
|
|
|
904 | – 911 | System error. See your System Administrator. |
|
| |
SYSTEM | System error. See your System Administrator. | |
ERROR |
| |
VECTOR ## |
| |
|
|
|
If these solutions do not work or you have a problem or error code not listed, see your System Administrator or call Service at the number listed on the back of this manual.