Paxar TC6032EM manual Pinch and Feed Rollers, Platen Roller

Page 28

4. Use a dry, soft-bristle brush, such as a toothbrush, to clean either the standard (black) or linerless (red/orange textured) platen roller.

Platen

Roller

5. Turn the platen roller with your finger, and then continue cleaning.

6. Reload the supplies and close the label deflector and supply cover.

NOTE: DO NOT use alcohol or solvents on linerless (red/orange textured) platen rollers.

If the brush does not remove all the adhesive:

♦use isopropyl alcohol ONLY on the standard (black) platen roller. Moisten a cotton swab with isopropyl alcohol and run the cotton swab across the platen roller. Turn the platen roller with your finger to make sure the platen roller is clean all the way around. After cleaning, feed several inches of supply through without printing to remove any remaining isopropyl alcohol.

♦Call Service to clean the linerless (red/orange textured) platen roller.

Pinch and Feed Rollers

To clean the pinch and feed rollers:

1. Turn the printer off and open the supply cover.

2. Remove the supplies. See “Removing Supplies” in Chapter 3.

5-4 Care and Maintenance

Image 28

Contents Silver Printer Trademarks Using Batteries Using SuppliesTA B L E O F C O N T E N T S IntroductionTroubleshooting Care and MaintenanceGlossary Reference Information T R O D U C T I O N T t i n g S t a r t e dFollowing is a summary of the contents of this manual I n g t h i s M a n u a lI N G B AT T E R I E S A r g i n g B a t t e r i e sBattery Battery Compartment Door ButtonA n g i n g B a t t e r i e s C y c l i n g B a t t e r i e s F e t y I n f o r m a t i o nUsing Batteries I N G S U P P L I E S A d i n g S u p p l i e sCover Latch Buttons Supply HolderLoading for Peel Mode Label Deflector Applicator Roller Peel Bar Label DeflectorUsing Supplies M o v i n g S u p p l i e s Loading for Non Peel ModeApplicator Roller Label Deflector I n g t h e K e y p a d S I C O P E R AT I O N SKeys Description Entering Data I n g t h e D i s p l a y Indicator DescriptionReading the Status Line A n n i n g B a r codes Basic Operations R t i f i c a t i o n N o t e W e r M a n a g e m e n t I n t i n gT a c h i n g t h e S a f e t y S t r a p L p f u l R e m i n d e r s R E a N D M a I N T E N a N C E E a n i n gPrinthead Platen Roller PrintheadPinch and Feed Rollers Platen RollerScanner Window Black Mark SensorBlack Mark Sensor Scanner Flex Cable Adhesive Buildup Scanner Flex CableE a r i n g S u p p l y J a m s Pinch Roller Feed Roller is behind itO r i n g t h e P r i n t e r Troubleshooting Problem SolutionError Codes Codes DescriptionO S S a R YA Term DefinitionGlossary Specification s C e s s o r i e s / O p t i o n s