Using the Central Configuration Manager
20At the bottom of this window is an option to restore some of the configuration settings to their default values. If you check this box, the following settings will be restored:
Global Setting | Default Value |
|
|
Max Frame Size | 1518 or 1522 if tagged |
|
|
Counter Mode | Count good frames |
|
|
Priority Scheduling Mode | 8, 4, 2, 1 weighted |
|
|
VLAN Tag for LAN Port (egress) | Egress frame unmodified |
|
|
VLAN Tag for LAN Port | Ingress frame unmodified |
(ingress) |
|
|
|
Power Forward | Auto detection |
|
|
SNMP “Set” Permission | Not allowed |
|
|
|
|
Port Setting | Default Value |
|
|
State | Forwarding |
|
|
Link | Auto negotiation |
|
|
Flow Control | Off |
|
|
MDI[X] | Force MDI |
|
|
Multicast Limit | 3% |
|
|
Priority Lookup | Tag & IPV4 |
|
|
Port Priority | 1 |
|
|
VLAN ID | 1 |
|
|
Port based VLAN | All ports on same VLAN |
|
|
46