F
Troubleshooting
If you encounter problems with the NJ205 IntelliJack:
■Verify the IntelliJack is receiving power by viewing the Power LED (it should be on). If the Power LED is not on, make sure that:
■(If using Power Over Ethernet) the other end of the network cable is plugged into a switch on the network that has Power Over Ethernet integrated into it, or one that feeds into an external midspan power supply that supports Power Over Ethernet.
■(If using a local power supply) the power supply is plugged into the IntelliJack and into a working electrical outlet.
■Verify the IntelliJack is connected to the network properly by viewing the Link LED (it should be on). If the Link LED is not on, make sure the network cable:
■Is terminated properly. Refer to the connector manufacturer’s instructions for terminating the cable. Be sure to test the connector and verify it is working.
■
■
Has a valid connection to the network.
Adheres to proper length and cabling specifications for your network.
75