Uniden DCT 748 owner manual Troubleshooting

Symptom	Suggestion
	• The call was placed through a switchboard.
The Caller ID does not display.	• Call your local telephone company to verify your Caller ID service is current. There may be a
	problem with your Caller ID service.
You cannot register the handset	• Charge the battery pack for 15-20 hours.
at the base.	• Change the Digital Security Code (see page 15).
The handset doesn't	• Change the Digital Security Code (see page 15).
communicate with other
	• Make sure that you have registered all handsets.
handsets.
An extra handset can't join	• Make sure there are not 2 handsets already using the conference feature.
the conversation.	• Make sure that another handset is not in privacy mode.
Room Monitor feature does not	• Make sure to place the handset(s) within the range of the base.
work.
The answering system does not	•Make sure the base unit is plugged in.
	•Make sure that the answering system is turned on.
work.
	•Make sure that the message record time is not set to Announce only (see page 50).
Messages are incomplete.	•The incoming messages may be too long.
Remind callers to leave a brief	•The memory maybe full. Delete some or all of the saved message.
message.
No sound on the base unit or	•Adjust the speaker volume on the base unit or handset.
haneset speaker during call
	•Make sure the call screen feature is set to on.
monitoring or message playback.
Cannot access remote call-in	•Make sure you are using the correct PIN number.
features from another touchtone	•Make sure that the touch-tone phone you're using can transmit the tone for at least two seconds.
phone.	If it cannot, you may have to use another phone to access your phone.
Time stamp cannot be heard.	•Make sure you have set the time (see "Setting Day and Time" on page 22).

[ 7 1 ] T R O U B L E S H O O T I N G w w w . u n i d e n . c o m