Uniden DCT 748 owner manual Answering System Setup, Setting a Security Code, Setting the Ring Time

Answering System Setup

This main menu option allows you to set up the built in answering device from the handset.

Setting a Security Code

Security code allows you to set a two-digit security code so you can play your messages from a remote location.

1)	Press menu/clear. Select the Answ. Setup menu, and
		5GEWTKV[%QFG
	then the Security Code submenu.
				
2)	Enter a two-digit security code (01-99) using the		AA
	number keypad (0-9).
3)	Press select/ /audio tone. You will hear a confirmation tone.

Setting the Ring Time

Ring Time allows you to set the number of rings the caller hears before your answering system plays the outgoing message. You can set the ring time to answer after two, four, or six rings. If you enable the Toll Saver (TS), the answering system picks up after two rings if you have new messages and after four rings if there are none.

1)	Press menu/clear. Select the Answ. Setup menu, and
		4KPI6KOG
	then the Ring Time submenu.
		6QNN5CXGT
2)	Press /vol/∧ or /vol/∨ to select a Ring Time (Toll
		6KOGU
	Saver, 2 Times, 4 Times, or 6 Times).
3)	Press select/ /audio tone. You will hear a confirmation tone.

[ 4 9 ] T H E I N T E G R A T E D T E L E P H O N E A N S W E R I N G D E V I C E w w w . u n i d e n . c o m