Uniden DCT 748 Register the Handset, For the DCX700 expansion handset, Compatible model

Register the Handset	note
If you purchase an expansion handset, you need to register the handset before use.
Only one handset can be registered at a time.

Handsets supplied with the phone are registered to the base by the factory. When charged, pre-registered handsets display a handset ID number. Handsets that have

not been registered display Models vary! Charge handset on the base for registration or refer to Owner's Manual. When you register an extra handset to

the base, the handset ID will be assigned.

For the DCX700 expansion handset

1) Before registering the extra handset, the battery pack MUST be charged for 15-20 hours.

2) Place the extra handset in the main base unit to begin registration.

3) While the handset is registering, Handset Registering will appear in the LCD. When Registration Complete is displayed, the handset has been registered to the base. If Registration Failed appears, please try these steps again.

For the DCX640 expansion handset (DCT7 series-				Your phone may be
compatible model)				compatible with other
				Uniden 2.4GHz Digital
1)	Disconnect the AC adapter.			Expandable Systems.
2)	While holding find hs/	and	on the base,	Please visit our website
	connect the AC adapter.			at www.uniden.com for
				model number
	Keep pressing find hs/	and	on the base until
				confirmation or call our
	the CHARGE LED starts to blink.			customer service at
3)	On the handset, press and hold # until you hear beep.			(800) 297-1023.
w w w . u n i d e n . c o m				G E T T I N G S T A R T E D [ 1 4 ]

GETTING STARTED