B. Install the rechargeable battery pack into the handset
The handset is powered by a rechargeable battery pack. The battery recharges automatically when the handset is placed in the base unit.
1) Press down on the handset battery case cover (use the finger indention for a better grip) and slide the cover downward to remove.
2) Plug the battery connector (red & black wires) into the jack inside the battery compartment. (The connector notches fit into the grooves of the jack only one way). Match the wire colors to the polarity label in the battery compartment, connect the battery and listen for a click to insure connection.
3) Make sure you have a good connection by gently pulling on the battery wires. If the connection is secure, the battery jack will remain in place.
4) Place the battery case cover back on the handset and slide it upwards until it clicks into place.
note 
•Use only the Uniden
•Replacement battery packs are also available through the Uniden Parts Department at
(800)
GETTING STARTED
w w w . u n i d e n . c o m | G E T T I N G S T A R T E D [ 8 ] |
