3Com 8814, 8810 manual Chassis and Slots Switch, Switch 8807 slots

Page 10

10CHAPTER 1: PRODUCT OVERVIEW

General Architecture The Switch 8800 Family use integrated chassis, which can be subdivided into power area, board area, backplane and fan area.

Chassis and Slots Switch 8807

Figure 4 Switch 8807 slots

 

Fabric

 

 

Fabric

 

 

I/O Module

Fan

 

I/O Module

 

tray

 

I/O Module

 

 

 

I/O Module

 

 

I/O Module

 

AC PSU

PoE

AC PSU

Entry

 

 

■The Switch 8807 chassis provides seven slots in its board area: The top two accommodate fabrics, which can operate in 1+1 redundancy mode; the remaining five accommodate I/O or application modules, which you can select from various available models. All modules in this area are hot-swappable.

■At the bottom of the chassis is the power area that can accommodate one PoE entry module and two PSUs. The two PSUs are online-swappable; they can operate in 1+1 redundancy mode. The switch supports AC power inputs.

■On the right of the chassis is the fan area that contains one vertical hot-swappable fan tray. The fan tray draws and exhausts air from left to right.

Page 9 Page 11
Image 10
Page 9 Page 11
Contents 3Com Switch 8800 Family 3Com Corporation Campus Drive Marlborough, MA USA United States Government LegendContents Switch Installation Examining Installation Site Installation ToolsLists icon conventions that are used throughout this guide ConventionsProtocols that are used to interconnect LANs Lists text conventions that are used throughout this guideDocumentation SwitchRelated About this DocumentPreface 8800s3Com Switch 8810 10-Slot Chassis 3Com Switch 8814 14-Slot Chassis Chassis and Slots Switch Switch 8807 slotsSwitch 8810 slots Functions SwitchStructure Specifications Switch AC Power SystemEach Ethernet port can deliver up to 15.4 W to its PD External PoE Power Rack 3C17509 PoE entry areaNormal Abnormal Mbus IntroductionLabel Color State Abnormal reason Fan tray panel of the Switch 8800 Family Role and functionFabric Modules Gbps Switch FabricPanel Management Ports RS232/485 port specificationsCompact Flash CF slot Status LEDs for the management 10Base-T/100Base-TX portAUX port specifications Reset buttonConsole port specifications Status LEDsCF status LED Status LEDs for the 360 Gbps Switch Fabric moduleGbps Switch Fabric LED Status Status LEDs for I/O moduleGbps Switch Fabric Technical specifications 720 Gbps Switch Fabric specificationsAUX port Status LEDs for the 720 Gbps Switch Fabric module Status LEDs for the 720 Gbps Switch Fabric module Technical specifications of the Switch 8800 FamilySupported software features Software FeaturesSoftware features of the Switch 8800 Family Lacp Software features of the Switch 8800 Family Product Overview Overview O modules available to the Switch 8800 Family3C17511 module specifications 3C17511 1-port 10GBASE-X XenpakPanel and LEDs 3C17511 module panel 3C17512 module specifications3C17512 2-port 10GBASE-X XFP Module Port LEDs on the 3C17511 module3C17513 12-port 1000BASE-X SFP Module SpecificationsPanel and LEDs Figure 3C17514 24-port 1000BASE-X SFP Module 3C17513 module has two LEDs for each port on its panelModule 3C17516 24-port10/100/1000BASE-T 3C17525 1-port 10GBASE-X Advanced Xenpak ModulePanel and LEDs 3C17525 module panel 3C17526 module specifications3C17526 4-port 10GBASE-X XFP Module Port LEDs on the 3C17525 module3C17526 module panel 3C17527 module specifications3C17527 2-port 10GBASE-X XFP Advanced Module 1000 Mbps optical port LEDs on the 3C17526 module3C17528 48port 10/100/1000 BASE-T RJ-45 Module 3C17528 module has one LED for each port on its panel3C17531 24-port 10/100/1000BASE-T Advanced Module 3C17530 24-port 1000BASE-X SFP Advanced ModulePanel and LEDs 3C17530 module panel Panel and LEDs 3C17531 module panel 3C17532 module specifications3C17531 module has one LED for each port on its panel Port LEDs on the 3C17531 module3C17532 module has one LED for each port on their panel 3C17533 24-port 1000BASE-X SFP IPv6 ModulePanel and LEDs 3C17533 module panel 3C17534 24-port 10/100/1000BASE-T IPv6 Module 3C17534 module specifications3C17536 module specifications 3C17536 4-port 10GBASE-X XFP Quad IPv6 ModulePanel and LEDs 3C17536 module panel 3C17537 module specifications3C17537 2-port 10GBASE-X XFP IPv6 Module 1000 Mbps optical port LEDs on the 3C17536 modulePanel and LEDs 3C17537 module panel 3C17538 module specifications3C17538 48-port 1000BASE-X SFP IPv6 Module 1000 Mbps optical port LEDs on the 3C17537 moduleTechnical specifications for the 3C17542 Front panelAvailable cables Technical specifications for the 3C17546Technical specifications for the 3CR1754766 Status LEDs on the 3C17546Technical specifications for the 3C17548 Status LEDs on the 3CR1754766Transceiver Specifications Documents the 3Com Switch 8800 Family transceiversTransceivers Switch 8800 Available Modules Switch 8800 PortDensities O and Application Modules Recommendations SafetyGeneral Safety RecommendationsInstallation Preparation Harmful gas limits in an equipment room Limitation on dust content in equipment roomMechanical active material Unit Content Gas Average mg/m3 Max. mg/m3Required installation tools Installation ToolsPower Supply Requirements Space Requirements MeasureConfirming Installation Preparation Installation FlowMounting the Switch User-Supplied Cabinet One Switch 8807 chassis in a cabinetTwo Switch 8807 chassis in a cabinet One Switch 8807 chassis in a cabinet Switch 8807 11UOne Switch 8810 chassis in a cabinet Two Switch 8807 chassis in a cabinet Switch 8807 11UOne Switch 8814 chassis in a cabinet One Switch 8810 chassis in a cabinet Switch 8810 14UOne Switch 8814 chassis in a cabinet Switch 8814 17U CabinetConnecting Pgnd Wire Common grounding environment Connecting Pgnd Wire and Power CordOther grounding environment Ground the switch when ground bar is available Connecting AC Power Cord Ground the switch via AC PE wireConnect AC power cord to the Switch Connecting PoE power cable Grounding PoE chassisInstall mounting ears onto the both sides of the switch Installing Fan TrayFan tray is hot swappable Lightning Protection Box Contact take the fan tray out from the packing bagInstalling I/O modules Fasten the screw on top of the PoE lightning protection boxRJ-45 Signal Direction DB-25 DB-9 Connecting Interface CablesConnecting console cable IntroductionAUX cable AUX cable pinoutsConnecting category-5 shielded cable Connecting AUX cableIntroduction to RJ-45 connector Connecting FiberCable Management Cable Routing RecommendationsIntertwinement or bending is allowed Cable bundling example Cable fixing example Tie-binding parameters Verifying InstallationInstallation checking list Cable bundle diameter mm Space between bundles mmSwitch Installation Connecting the Cables Setting upConfiguration EnvironmentPowering and Booting the Switch Verifying Installation Before Powering SwitchZbbtest Debugging the System Troubleshooting the PSU LEDs on the PSUInput LED green and Output LED green are OFF Display Power Command Indicates the PSU is Not in PositionIndicator State description Fail LED red is on Check thatReplacing AC PSU Hardware MaintenanceIndicator Removing an AC PSUInstalling an AC PSU Removing and cleaning the air filter of PSUInstalling the air filter of PSU Replacing and Cleaning Chassis’s Air FilterRequired tools Removing and Cleaning the Chassis’s Air FilterInstalling the Chassis’s Air Filter Removing a ModuleReplacing the Fan Tray Required tools Installing a ModuleReplacing the Fan Tray Software UpgradingRequired cables Main Menu Serial Submenu Please Select File Xmodem downloading ...CCC This procedure uses a Switch 8814 work as the Tftp client Tftp and to 0x0 if you are using FTP Using FTP Port using FTP This procedure uses a Switch 8814 work as the FTP clientUsing FTP Load host programConfiguration did not save during the I/O module reboot Boot ROM and host program loading process is now completeUsing Tftp ProgramInsufficient Flash memory Password LossRepresentative Switch Monitoring and Maintenance Power Lightning ArresterInstallation procedure Installing a Lightning Arrester for Network PortUse the nylon ties to bundle the cables neatly Installation precautions Installation diagram of a network port’s lightning arresterChapter a Lightning Protection of the Switch 3Com Network SupervisorAccess Manager DirectorManager HP OpenViewNetwork Node Application such as 3Com Enterprise Management Suite EMSAppendix B 3COM Network Management
Related manuals
Manual 97 pages 32.87 Kb

8810, 8814, 8807 specifications

The 3Com 8814, 8810, and 8807 are renowned products from the networking giant 3Com, which played a significant role in the evolution of networking technology in the early 1990s. These devices were instrumental during a time when organizations were transitioning from traditional communication systems to more sophisticated networking solutions.

The 3Com 8814 is a multi-port networking hub designed for small to medium-sized businesses. One of its main features includes a 10Base-T Ethernet capability, allowing for fast and reliable connectivity among various devices within a local area network (LAN). The 8814 supports up to 14 connections, providing scalability for growing businesses. The hub’s ease of use is notable; it features a plug-and-play design, which aids in quick setup without requiring extensive configuration. This plug-and-play functionality, alongside its robust physical and electrical performance, made the 8814 an appealing choice for organizations looking to enhance their networking infrastructure without significant investment.

Moving on to the 3Com 8810, this device is labeled as an intelligent network switch and ushered in advancements in network management and performance. A critical element of the 8810 is its ability to support both 10/100Base-T Ethernet connections, effectively allowing mixed-speed environments. Its built-in management features, enabled by 3Com's networking technologies, offered users the ability to monitor traffic flow, manage bandwidth allocation, and configure network settings through a user-friendly interface. This switch also incorporated advanced features like VLAN support, increasing security and segmentation within networks, which proved invaluable for sophisticated networking environments.

Lastly, the 3Com 8807 represents a more versatile and high-performance switch option suited for larger networks. This model features a stackable design that allows for a broader range of scalability and redundancy. It supports both fast Ethernet and Gigabit Ethernet, ensuring that organizations can expand their network speeds as needed. The 8807 includes features for enhanced fault tolerance and link aggregation, which bolsters reliability and performance under heavy traffic loads. Its integration with 3Com's Network Management Software provided administrators with unprecedented control over their networks, empowering them to optimize performance and troubleshoot issues effectively.

Overall, the 3Com 8814, 8810, and 8807 exemplified the company's commitment to innovation in networking technology, providing businesses with the tools necessary to develop efficient, scalable, and reliable network infrastructures. Each of these devices played a crucial role in shaping the landscape of networking, emphasizing ease of use, management capabilities, and performance.
Top Page Image Contents