3Com 8810, 8807 3C17537 2-port 10GBASE-X XFP IPv6 Module, Panel and LEDs 3C17536 module panel

Page 41

3C17537 2-port 10GBASE-X (XFP) IPv6 Module 41
Table 54 3C17536 module specifications

Item	Specification

Boot ROM	512 KB
SDRAM	128 MB/256 MB
Physical dimensions (W x D)	366.7 x 340 mm (14.4 x 13.4 in.)
Number of ports	Four
Max power consumption (with bottom plate)	160 W
Connector	XFP
Rate	10 Gbps

Panel and LEDs Figure 26 3C17536 module panel

The 3C17536 module has two LEDs for each optical port on its panel.

Table 55 1000 Mbps optical port LEDs on the 3C17536 module

LED	Status	Meaning

LINK	OFF	No link is present.
	Green	A link is present.
ACT	OFF	No packets are transmitted/received on the port.
	Orange blinking	Packets are being transmitted/received on the port.

Matching Cable For details about XFP optical modules available to the XFP optical ports on the 3C17536 module and their matching cable types, see Table 66 on page 46.

3C17537 2-port 10GBASE-X (XFP) IPv6 Module

This section provides specifications for the 2-port 10GBASE-X (XFP) IPv6 module (3C17537).

Specifications The 3C17537 modules provide two 10GBASE-XXFP/LC ports.

Table 56 3C17537 module specifications

Item	Specification

CPU	MPC8245
Boot ROM	512 KB
SDRAM	128 MB/256MB
Physical dimensions (W x D)	366.7 x 340 mm (14.4 x 13.4 in.)
Max power consumption	87 W
Number of ports	Two
Connector	XFP
Rate	10 Gbps

Image 41

Contents 3Com Switch 8800 Family United States Government Legend 3Com Corporation Campus Drive Marlborough, MA USAContents Examining Installation Site Installation Tools Switch InstallationProtocols that are used to interconnect LANs ConventionsLists icon conventions that are used throughout this guide Lists text conventions that are used throughout this guideRelated SwitchDocumentation About this Document8800s Preface3Com Switch 8810 10-Slot Chassis 3Com Switch 8814 14-Slot Chassis Switch 8807 slots Chassis and Slots SwitchSwitch 8810 slots Structure SwitchFunctions Each Ethernet port can deliver up to 15.4 W to its PD AC Power SystemSpecifications Switch PoE entry area External PoE Power Rack 3C17509Label Color State Abnormal reason Mbus IntroductionNormal Abnormal Role and function Fan tray panel of the Switch 8800 FamilyPanel Gbps Switch FabricFabric Modules Compact Flash CF slot RS232/485 port specificationsManagement Ports Status LEDs for the management 10Base-T/100Base-TX portConsole port specifications Reset buttonAUX port specifications Status LEDsGbps Switch Fabric LED Status Status LEDs for the 360 Gbps Switch Fabric moduleCF status LED Status LEDs for I/O module720 Gbps Switch Fabric specifications Gbps Switch Fabric Technical specificationsAUX port Status LEDs for the 720 Gbps Switch Fabric module Technical specifications of the Switch 8800 Family Status LEDs for the 720 Gbps Switch Fabric moduleSoftware features of the Switch 8800 Family Software FeaturesSupported software features Lacp Software features of the Switch 8800 Family Product Overview 3C17511 module specifications O modules available to the Switch 8800 FamilyOverview 3C17511 1-port 10GBASE-X Xenpak3C17512 2-port 10GBASE-X XFP Module 3C17512 module specificationsPanel and LEDs 3C17511 module panel Port LEDs on the 3C17511 modulePanel and LEDs Figure Specifications3C17513 12-port 1000BASE-X SFP Module 3C17513 module has two LEDs for each port on its panel 3C17514 24-port 1000BASE-X SFP Module10/100/1000BASE-T 3C17516 24-portModule 3C17525 1-port 10GBASE-X Advanced Xenpak Module3C17526 4-port 10GBASE-X XFP Module 3C17526 module specificationsPanel and LEDs 3C17525 module panel Port LEDs on the 3C17525 module3C17527 2-port 10GBASE-X XFP Advanced Module 3C17527 module specifications3C17526 module panel 1000 Mbps optical port LEDs on the 3C17526 module3C17528 module has one LED for each port on its panel 3C17528 48port 10/100/1000 BASE-T RJ-45 ModulePanel and LEDs 3C17530 module panel 3C17530 24-port 1000BASE-X SFP Advanced Module3C17531 24-port 10/100/1000BASE-T Advanced Module 3C17531 module has one LED for each port on its panel 3C17532 module specifications Panel and LEDs 3C17531 module panel Port LEDs on the 3C17531 modulePanel and LEDs 3C17533 module panel 3C17533 24-port 1000BASE-X SFP IPv6 Module3C17532 module has one LED for each port on their panel 3C17536 module specifications 3C17534 module specifications3C17534 24-port 10/100/1000BASE-T IPv6 Module 3C17536 4-port 10GBASE-X XFP Quad IPv6 Module3C17537 2-port 10GBASE-X XFP IPv6 Module 3C17537 module specificationsPanel and LEDs 3C17536 module panel 1000 Mbps optical port LEDs on the 3C17536 module3C17538 48-port 1000BASE-X SFP IPv6 Module 3C17538 module specificationsPanel and LEDs 3C17537 module panel 1000 Mbps optical port LEDs on the 3C17537 moduleFront panel Technical specifications for the 3C17542Technical specifications for the 3CR1754766 Technical specifications for the 3C17546Available cables Status LEDs on the 3C17546Status LEDs on the 3CR1754766 Technical specifications for the 3C17548Transceivers Documents the 3Com Switch 8800 Family transceiversTransceiver Specifications Densities Switch 8800 PortSwitch 8800 Available Modules O and Application Modules General Safety SafetyRecommendations RecommendationsInstallation Preparation Mechanical active material Unit Content Limitation on dust content in equipment roomHarmful gas limits in an equipment room Gas Average mg/m3 Max. mg/m3Power Supply Requirements Space Requirements Installation ToolsRequired installation tools MeasureInstallation Flow Confirming Installation PreparationOne Switch 8807 chassis in a cabinet Mounting the Switch User-Supplied CabinetOne Switch 8807 chassis in a cabinet Switch 8807 11U Two Switch 8807 chassis in a cabinetTwo Switch 8807 chassis in a cabinet Switch 8807 11U One Switch 8810 chassis in a cabinetOne Switch 8810 chassis in a cabinet Switch 8810 14U One Switch 8814 chassis in a cabinetCabinet One Switch 8814 chassis in a cabinet Switch 8814 17UOther grounding environment Connecting Pgnd Wire and Power CordConnecting Pgnd Wire Common grounding environment Ground the switch when ground bar is available Ground the switch via AC PE wire Connecting AC Power CordConnect AC power cord to the Switch Grounding PoE chassis Connecting PoE power cableFan tray is hot swappable Installing Fan TrayInstall mounting ears onto the both sides of the switch Contact take the fan tray out from the packing bag Lightning Protection BoxFasten the screw on top of the PoE lightning protection box Installing I/O modulesConnecting console cable Connecting Interface CablesRJ-45 Signal Direction DB-25 DB-9 IntroductionAUX cable pinouts AUX cableIntroduction to RJ-45 connector Connecting AUX cableConnecting category-5 shielded cable Connecting FiberIntertwinement or bending is allowed Cable Routing RecommendationsCable Management Cable bundling example Cable fixing example Installation checking list Verifying InstallationTie-binding parameters Cable bundle diameter mm Space between bundles mmSwitch Installation Configuration Setting upConnecting the Cables EnvironmentVerifying Installation Before Powering Switch Powering and Booting the SwitchZbbtest Debugging the System LEDs on the PSU Troubleshooting the PSUIndicator State description Display Power Command Indicates the PSU is Not in PositionInput LED green and Output LED green are OFF Fail LED red is on Check thatIndicator Hardware MaintenanceReplacing AC PSU Removing an AC PSURemoving and cleaning the air filter of PSU Installing an AC PSUReplacing and Cleaning Chassis’s Air Filter Installing the air filter of PSUInstalling the Chassis’s Air Filter Removing and Cleaning the Chassis’s Air FilterRequired tools Removing a ModuleReplacing the Fan Tray Installing a ModuleReplacing the Fan Tray Required tools Required cables UpgradingSoftware Main Menu Serial Submenu Please Select File Xmodem downloading ...CCC This procedure uses a Switch 8814 work as the Tftp client Tftp and to 0x0 if you are using FTP This procedure uses a Switch 8814 work as the FTP client Using FTP Port using FTPLoad host program Using FTPUsing Tftp Boot ROM and host program loading process is now completeConfiguration did not save during the I/O module reboot ProgramRepresentative Password LossInsufficient Flash memory Switch Monitoring and Maintenance Lightning Arrester PowerUse the nylon ties to bundle the cables neatly Installing a Lightning Arrester for Network PortInstallation procedure Installation diagram of a network port’s lightning arrester Installation precautionsChapter a Lightning Protection of the Switch Supervisor 3Com NetworkDirector Access ManagerNetwork Node HP OpenViewManager Application such as 3Com Enterprise Management Suite EMSAppendix B 3COM Network Management

Related manuals

Manual 97 pages 32.87 Kb