4.Fasten the spring-loaded screws on the front of the 10BASE-T Module face-plate to the concentrator with your fingers (do not overtighten).
5.Attach the twisted pair cable to the port on the front of the 10BASE-T Module as shown in Figure 3-2. Then attach the other end of the cable to another 10BASE-T Module, a 10BASE-T Transceiver, or a 10BASE-T Adapter Card.
Figure 3-2 shows a cable attached to the 10BASE-T Module.
Figure 3-2. 10BASE-T Module Cable Connection
3 - 4 ONline Ethernet 10BASE-T Module User’s Guide
