Job Properties
Job Properties can be accessed from within RIP Software and are settings associated with a particular job. The Job Properties come from either the Printing Properties set in client, or the Setup Properties set in RIP Software. To change the Job Properties, select Job Properties from the File menu. Within Job Properties you may preview the job by selecting Page preview, Layout preview or No preview (Macintosh only). Page preview displays the image of the job. Layout preview displays the job relative to the output media.
Job Properties General Tab
Preview Mode
You can display the image in Page Preview mode or view it in Layout Preview mode, which displays the image, as it will print on the media. Simply select the preview mode you want from the list.
Media Size
Displays the media size that the job was created for.
Size
Scale
You may change the size of the output here. In most cases, a job’s size should be controlled from within the application in which it was created to prevent unexpected results.
Fit to Media
Increases or decreases the job proportionally to fit the maximum width of the output device.
29