Welcome
Welcome to the User Guide for the Roland ColorChoice® RIP Software. We recommend that you read and understand this document. This document contains instructions for the Apple® Macintosh® and the Microsoft® Windows® 95/98/ME, Windows® 2000 and Windows NT®.
System Requirements Windows
The following table lists the minimum and high volume recommended system setup to run RIP Software. System requirements vary according to the size of the files to be scanned and printed, the output device used, and other variables. Your particular setup and intended use of the software determine what hardware and software setup you need to get the most out of RIP Software. If you are working with relatively small files, the minimum setup may be sufficient. Similarly, if you are working with large files, you should consider the recommended setup. Consult your dealer for advice when choosing a system.
| Minimum | Recommended | |
|
|
| |
Processor | Pentium® II 233MHz | Pentium II 400MHz or faster | |
|
|
| |
RAM | 128MB | 256MB or more | |
|
|
| |
Install Space | 200MB | 200MB | |
|
|
| |
Working Disk | 2GB | 4GB or more for storage | |
Space | |||
|
| ||
| Running latest version of: Windows95 | Running latest version of: Windows98 / | |
Operating System | OSR2 / Windows 98/ ME / NT 4.0(*1) / | ||
ME / NT 4.0(*1) / 2000 | |||
| 2000 | ||
|
| ||
Video | 800 x 600 screen resolution with 16 bit | 1024 x 768 screen resolution with 16 bit | |
color | color | ||
| |||
Others | 4x | 16x | |
|
|
| |
Parallel | ECP Capable | ECP Capable | |
|
|
| |
Network (*2) | 10 | 100 BASE | |
|
|
|
(*1) Windows NT 4.0 requires Internet Explorer 4 or greater & Service Pack 4 or higher.
(*2) Only when printers with network capabilities are used. TCP/IP should be installed and working properly.
5