IMPORTANT NOTES
291b
In addition to the items listed under “IMPORTANT SAFETY INSTRUCTIONS” and “USING THE UNIT SAFELY” on page 3
and 4, please read and observe the following:
Power Supply
301
• Do not use this unit on the same power circuit with any device that will generate line noise (such as an electric motor or variable lighting system).
307
• Before connecting this unit to other devices, turn off the power to all units. This will help prevent malfunctions and/or damage to speakers or other devices.
Placement
351
• Using the unit near power amplifiers (or other equipment containing large power transformers) may induce hum. To alleviate the problem, change the orientation of this unit; or move it farther away from the source of interference.
352a
• This device may interfere with radio and television reception. Do not use this device in the vicinity of such receivers.
352b
• Noise may be produced if wireless communications devices, such as cell phones, are operated in the vicinity of this unit. Such noise could occur when receiving or initiating a call, or while conversing. Should you experience such problems, you should relocate such wireless devices so they are at a greater distance from this unit, or switch them off.
354b
• Do not expose the unit to direct sunlight, place it near devices that radiate heat, leave it inside an enclosed vehicle, or otherwise subject it to temperature extremes. Also, do not allow lighting devices that normally are used while their light source is very close to the unit (such as a piano light), or powerful spotlights to shine upon the same area of the unit for extended periods of time. Excessive heat can deform or discolor the unit.
355
• To avoid possible breakdown, do not use the unit in a wet area, such as an area exposed to rain or other moisture.
356
• Do not allow rubber, vinyl, or similar materials to remain on the unit for long periods of time. Such objects can discolor or otherwise harmfully affect the finish.
357
• Do not put anything that contains water (e.g., flower vases) on the unit. Also, avoid the use of insecticides, perfumes, alcohol, nail polish, spray cans, etc., near the unit. Swiftly wipe away any liquid that spills on the unit using a dry, soft cloth.
359
• Do not paste stickers, decals, or the like to this instrument. Peeling such matter off the instrument may damage the exterior finish.
add 1
• During operation, this unit must be placed at a distance of no less
than 20 cm from any walls.
add 2
• Do not allow objects to remain on top of the unit while it is in
operation.
• If you cover the top of the unit, the function is defeated, and temperature can rise to overly high level, which could cause burns if they are accidentally touched.
* Please also refer to Important Notes on Placement (p. 9).
Maintenance
401a
• For everyday cleaning wipe the unit with a soft, dry cloth or one that
has been slightly dampened with water. To remove stubborn dirt, use a cloth impregnated with a mild,
402
• Never use benzine, thinners, alcohol or solvents of any kind, to avoid
the possibility of discoloration and/or deformation.
Additional Precautions
553
• Use a reasonable amount of care when using the unit’s buttons,
sliders, or other controls; and when using its jacks and connectors. Rough handling can lead to malfunctions.
556
• When connecting / disconnecting all cables, grasp the connector
557
• A small amount of heat will radiate from the unit during normal
operation.
558b
• To avoid disturbing your neighbors, try to keep the unit’s volume at
reasonable levels (especially when it is late at night).
559a
• When you need to transport the unit, package it in the box (including
padding) that it came in, if possible. Otherwise, you will need to use equivalent packaging materials.
562
• Use a cable from Roland to make the connection. If using some other
make of connection cable, please note the following precautions.
• Some connection cables contain resistors. Do not use cables that incorporate resistors for connecting to this unit. The use of such cables can cause the sound level to be extremely low, or impos- sible to hear. For information on cable specifications, contact the manufacturer of the cable.
Table of Contents |
|
Main Features | 1 |
USING THE UNIT SAFELY | 4 |
IMPORTANT NOTES | 5 |
Table of Contents | 5 |
Panel Descriptions | 6 |
Front | 6 |
Rear | 6 |
Connection Examples | 8 |
Using Two | 8 |
Important Notes on Placement | 9 |
Precautions When Connecting and Turning on the Power | 9 |
Reference | 10 |
Troubleshooting | 10 |
Specifications | 10 |
Dimensions | 11 |
Frequency Response | 11 |
5